Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion NEWBIE NEED SOME HELP WITH TOKHEIM 39 SHORT

Hello everyone, My wife bought this Tokheim 39 LHR Short pump without the guts. The Veeder Root and other parts were in a box by themselves. I need help with some pictures that shows how to put it back together. Please help.

Thanks

Leave the pump and other guts out not important to the unit anymore. I have a LRP. There's three brackets to mount the unit to depending on how your looking at it there's two on the right and one on the left in the back or front depends on where your looking at it from.

If you will send me an email (in my profile) I will email you a file of pics of a 39 being disassembled with most shots that you will need to figure out where stuff goes. If you run in to a specific problem you can ask again on here and someone should be able to help....Gary

I would REALLY like to see the pics as well. Email sent Rabbitman.

First there were four different Tokheim 39, you need to determine which one you have, then go to this page of my website: http://petrolianacollectibles.com/tokheim%20pumps.htm

Click on the 39 you have (read the top of the page, it is very informative), the parts manuals show a complete breakdown of the 39.

Jack Sim

Thanks for your help. What, where and or how does the Site Glass, Spinners and the Site Glass Bezel hook up/installed to?

Thanks Jim for the info. I will be contacting you later for some of the manuals.

Post a picture of your parts. Several different styles were used.

I want to know how the install the Site glass spinners and site glass bezel. Do they get hooked up to the veeder root?

The sight glass manifold attaches to the top brace and not the VR. Post pictures of your parts as on some 39's the sight glass manifold attaches directly to the top brace and on some brackets are utilized.

I am not on my computer I have to wait till Sunday to post pics. Thanks for all the help

Site Glass Manifold?? What does that look like??

Not on mine, mine bolts to the inside top

The sight glass manifold is the complete assembly that the spinners, sight glass and retaining ring attach to. As seen in this photograph, above the VR.