Oldgas.com Home
Posted By: ynot Gilbarco Air-Meter - Thu Nov 30 2006 11:27 PM
Okay gentlemen.

How is the glass fastened, attached or held in etc, on a Gilbarco AM31-1 air-meter.
Posted By: Jack Sim Re: Gilbarco Air-Meter - Fri Dec 01 2006 02:22 AM
Gilbaro used so many model numbers it is difficult to keep track of the all, but if you have a Gilbarco made out of sheet metal, the glass was held in by a form fitted piece of rubber, no one is reproducing the rubber. If you need any parts you should check my website: www.crspub.com
Thanks,
Jack Sim
Author Gas Pump Identificaiton book and Air Meter Identification book
Posted By: ynot Re: Gilbarco Air-Meter - Fri Dec 01 2006 02:43 AM
Thanks!

Some used parts there but unfortunately no said piece of rubber.

[This message has been edited by ynot (edited 11-30-2006).]
Posted By: richburris6 Re: Gilbarco Air-Meter - Sat Dec 02 2006 12:38 AM
I have used the gilbarco rubber (#105) in the past with good results. This is the same rubber that was used in the 996 gas pumps.

Rich B
Posted By: ynot Re: Gilbarco Air-Meter - Sat Dec 02 2006 06:34 AM
Thanks Rich! Could you please elaborate some on that #105 gilbarco rubber. Dont fool with gas pumps, so not familiar with the 996.
© Primarily Petroliana Shop Talk