Oldgas.com Home
Posted By: Craig Osbeck Parts - Sun Sep 27 2020 08:44 PM
I will try this again. Each time I do this with a lot of stuff the computer just does not take anything and locks up.

1) Tall bennett sight glasses, (2) $60
2) Bennett blue porcelain faces. $50
3) Shell blue print of tanker truck. $35
4) 39 tokheim polished hose outlet cover.$50
5) 39 tokheim sight glass with bezel. $50
6) 39 tokheim sight glass (2) $50
7) Powell 1" polished brass shut off valve. $375
8) Gilbarco sight glass (2) with cast bezel. $50
9) Polished brass visi gauge on glass missing. $100
10) Boyle Dayton door bezel.$35
11) " " control arm $25
12) MS 80 Hose reel $5
13) Outside retractor reel outlet Polished. $10
14) Gilbarco sight glass bezel. $5
15) Bowser light switch not sure if it is a 310 or 410. $25
16) Hi-way 13.5 lenses nice. $550
17) Clock face hands, 1 set Bowser exacto, one set Bennett 150, and three used hands Bennett 77. $35
Shipping not included

Attached picture IMG_2898.JPG
Attached picture IMG_2723.jpg
Attached picture IMG_2757.jpg
Attached picture IMG_2545.jpg
Posted By: Speedracer Re: Parts - Mon Oct 05 2020 11:42 PM
Craig, Does that shut-off valve go to a specific pump that you know of?
Posted By: Craig Osbeck Re: Parts - Mon Oct 12 2020 12:36 AM
It was used I believe on a couple different ones, sorry for the delay. Sending the stuff to ebay.
Posted By: Speedracer Re: Parts - Mon Oct 12 2020 02:38 AM
Ok thanks Craig. Does anyone know if the brass shut-off valve is correct for a Correct Measure 10-H Pipe Organ?
Posted By: Craig Osbeck Re: Parts - Tue Oct 13 2020 02:53 AM
Parts on now on ebay.
© Primarily Petroliana Shop Talk