#741470
Tue Dec 31 2019 12:28 PM
|
Joined: Dec 2019
Posts: 19
Member
|
OP
Member
Joined: Dec 2019
Posts: 19 |
On the Tokheim model 39 L-RP, the ad glass opening in the door is not recessed like the clock glass is yet it uses the same weatherstrip. This means that the ad glass would either protrude slightly from the door skin or be recessed slightly behind the door skin. According to the maintenance manual, it installs the same way as the clock glass which has it protruding. I installed them this way but I am curious if anyone thinks this is wrong and they should be recessed.
|
|
|
Please - NO offers to Buy or Sell in this forum category
Statements such as, "I'm thinking about selling this." are considered an offer to sell.
|
|
|
Joined: Mar 2007
Posts: 246
Petro Enthusiast
|
Petro Enthusiast
Joined: Mar 2007
Posts: 246 |
You have it on the out side instead of inside.
|
|
|
|
Joined: Dec 2019
Posts: 19
Member
|
OP
Member
Joined: Dec 2019
Posts: 19 |
You have it on the out side instead of inside. Thanks for the reply. So you are saying it should be mounted so it sits behind the door skin towards the inside. May I ask what you are basing this on? Are you sure it is in backwards or do you just like the look better the other way? The manual shows it the way I have it and my original seal looks more weathered on the large side which indicated to me I have it correct. I would just hate to remove it and find out I had it right to begin with. Anyone else definitely know it goes the other way? Personally, I thought a standard "H" type weatherstrip would be best for the ad glass and would put the glass in line with the door skin and not on either side of it but everything I saw showed the same weatherstrip for the ad glass and the main computer window.
|
|
|
|
Joined: Oct 2003
Posts: 1,664 Likes: 25
Veteran Member
|
Veteran Member
Joined: Oct 2003
Posts: 1,664 Likes: 25 |
I don’t know which weather strip u need, but the way you have it is wrong. It should be flush, or slightly recessed to the inside.
|
|
|
|
Joined: Dec 2001
Posts: 3,004 Likes: 27
Veteran Member
|
Veteran Member
Joined: Dec 2001
Posts: 3,004 Likes: 27 |
Wrong side as stated. Never seen it mounted like that.
Last edited by keithia; Wed Jan 01 2020 03:55 PM.
Drive with Care and Buy Sinclair!! I buy Sinclair globes, signs, cans, ect.
|
|
|
|
Joined: Oct 2011
Posts: 22 Likes: 2
Member
|
Member
Joined: Oct 2011
Posts: 22 Likes: 2 |
Wolf, glad you brought this up. I am currently working on same pump door. I haven't ordered ad glass yet, but watching the opinions. thx
|
|
|
|
Joined: Dec 2019
Posts: 19
Member
|
OP
Member
Joined: Dec 2019
Posts: 19 |
I don’t know which weather strip u need, but the way you have it is wrong. It should be flush, or slightly recessed to the inside.
OK, but using the original w/s, it cannot be flush like i thought it might be unless I use a custom w/s. If I turn it around, it will be as recessed to the back side as it is now protuding from the front side. It might look as strange that way as it looks now. Perhaps someone who has restored a Tokheim Model 39 short with the ad glass can tell me what w/s I need to buy to make it flush.
|
|
|
|
Joined: Feb 2014
Posts: 2,995 Likes: 110
Veteran Member
|
Veteran Member
Joined: Feb 2014
Posts: 2,995 Likes: 110 |
Doug,
It won’t be flush. It looks like you have the correct rubber too. If it is ‘S’ shaped window trim, you just have it on wrong. You have the ad glass where the metal should be and the metal where the ad glass should be. In other words the rubber is facing out the correct way, you just need to take the glass out, move the rubber back one ‘notch’ and put the add glass in the back (recessed in). You will have to flip the rubber around so the grooves are correct, but keep the the rubber facing the same way (large curvy part towards the outside of the pump). It actually works both ways, but the larger side out looks better and is the way it was done back in the day.
-Steve
Last edited by Speedracer; Thu Jan 02 2020 12:55 AM.
-Steve B. (WTB: 48" Flying A button, 48" black/org Phillips 66, White Star, and Chevrolet Signs. Also looking for a Wayne 866. Send a PM. Thanks.)
|
|
|
|
Joined: Dec 2019
Posts: 19
Member
|
OP
Member
Joined: Dec 2019
Posts: 19 |
OK, I am convinced that I had it on backwards. If there is a 50/50 chance to get something right, you know which way I always seem to go. Here is a picture of the pump with the ad glass reversed.
|
|
|
|
|