Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums Want to Buy Petroliana Wayne 511 decal

Hi, Looking for the CUSTOM-BLENDED decal affixed to glass on each side of wayne 511 Sunoco multi blend pump - Any help is greatly appreciated!

Thanks, Ed

If you have the glass, simply take it to a sign shop. They should have the ability to make new vinyl decals from it. Be aware, the decals will have to be attached to the front of the glass as most decals only have the adhesive on the back? Paul www.severngaspumps.com

Good vinyl guy can do reverse vinyl inside glass . Had my neon clock done that way .

I personally would contact T-Way's Graphics. He will be more than happy to set you up.

http://www.t-waysgraphics.com/contact.html

You can have a sign shop do the decals reverse out to stick on the inside. apply decals, then tap off the glass strait accross at the desired height, then paint the white over the decal area. i use basecoat, the light will show thru..Any questions, contact me. Petrolight.com or call or text, 704-668-1071

These are best handled by your local vinyl shop.

Just have them do the lettering in reverse so you can apply them to the back side of the glass and then either apply a white vinyl banner or paint for the white.

Make sure they use translucent vinyl so it will show up as red when lighted.

If they use opaque vinyl - everything will be black when lighted.

Later . . .

Jim
T-way's Graphics

This is helpful information for many here!

Thanks,
Rob