Oldgas.com Home  

Click here for Petro Porcelain Sign auction listings


Home | Help | Events | Auctions | Parts | Pictures | Links | Contact
Previous Thread
Next Thread
Print Thread
#782559 Sat Oct 22 2022 12:30 PM
Joined: May 2016
Posts: 5
F
Finaman Offline OP
Member
OP Offline
Member
F
Joined: May 2016
Posts: 5
Just finished restoring a Tokheim 610 pump. It was in pieces when I bought it. When installing new skins noticed there was a shaft that protrudes outside the skin a couple feet below shut off handle. I thought it must indicate when gas to nozzle is on or off so I made a indicator from a strap hinge. Should there be a decal above indicator that says on - off or to car - storage?
Also need to install a 6” x 7” porcelain lead sign. I need to bend it about 1/2”. Will the porcelain crack if I bend it? Also I have searched the internet for a Tokheim pump with a indicator like this one and haven’t found any is this a rare option?

343F5A29-2D7A-4B57-AEF5-CB791598328F.jpeg D2C79E24-9612-49C4-BD2B-D22A28573773.jpeg
Last edited by Finaman; Sat Oct 22 2022 12:46 PM.
Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
Finaman #782560 Sat Oct 22 2022 12:35 PM
Joined: Jun 2013
Posts: 794
Likes: 6
M
Petro Enthusiast
Offline
Petro Enthusiast
M
Joined: Jun 2013
Posts: 794
Likes: 6
It would help to see a closeup photo of the shaft you are referring to.

#782562 Sat Oct 22 2022 04:00 PM
Joined: May 2016
Posts: 5
F
Finaman Offline OP
Member
OP Offline
Member
F
Joined: May 2016
Posts: 5
The shaft is under this pointer. It had a flat on two sides and was threaded in the center. I modified a strap hinge to mount on it for a pointer. It moves about 2” back and forth. So not sure what decal to use. ON - OFF or CAR - TO STORAGE.

822620B2-AAE3-4667-8273-B99B96A6A009.jpeg
Finaman #782564 Sat Oct 22 2022 04:34 PM
Joined: Feb 2003
Posts: 2,489
Likes: 30
G
Veteran Member
Offline
Veteran Member
G
Joined: Feb 2003
Posts: 2,489
Likes: 30
The porcelain will surely crack if you try to bend it to fit. Order a vinyl contains lead decal and it will be perfect. Paul www.severngaspumps.com

Finaman #782592 Sat Oct 22 2022 07:42 PM
Joined: Dec 2000
Posts: 1,746
Likes: 24
Veteran Member
Offline
Veteran Member
Joined: Dec 2000
Posts: 1,746
Likes: 24
The slot is for the "Nozzle Operating Pin." I have literature listed in the "Catalog" portion of my website.
Ron


Ron Scobie
http://www.gaspump.com or
rscobie(TheAtSymbol)gaspump.com
Phone - Six five one-653-6503
Finaman #782594 Sat Oct 22 2022 08:37 PM
Joined: Oct 2022
Posts: 1
R
New Member
Offline
New Member
R
Joined: Oct 2022
Posts: 1
I would go with off and on

Ratrod61 #782648 Mon Oct 24 2022 01:29 PM
Joined: Jun 2013
Posts: 794
Likes: 6
M
Petro Enthusiast
Offline
Petro Enthusiast
M
Joined: Jun 2013
Posts: 794
Likes: 6
The flow of fuel is controlled by the black handle with the ball on the end; under the discharge pipe. the only way to determine what the Nozzle Operating Pin was used for would be to purchase the literature from Ron Scobie or someone that has restored a 100% complete pump could provide the answer.


Moderated by  Oldgas, Ryan Underthun 

Link Copied to Clipboard

Click here for Gas Pump auction listings

Copyright © 2023 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.5