Oldgas.com Home

Home | Help | Events | Books | Pictures | Auctions | Links | Collectors | Parts | Contact

Topic Options
#143372 - Fri Jun 19 2009 09:18 PM What fasteners for this pump? wayne 60-need help!
LAWFISH Offline
Petro Enthusiast

Registered: Fri Jan 16 2004
Loc: Idaho
I am building this Wayne 60 an dneed some help. I bought this as a project totally apart. I now have most of it painted but need fasteners to assemble it. I am using just a few (wrong) bolts to mock it up.

Can anyone tell me if someone sell a whole kit for the pump or should I just use what ever fits???? The main problem is that I am not sure but the front facing ones look like they will be visible and need to be some what ornamental? Also, the front ODDBALL ones that go through the front panels and twist to secure the front panel??? where to get those??


Thanks for any help---

Dave


Attachments
DSCF8119.JPG

DSCF8117.JPG

DSCF8114.JPG



Top
Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
#143373 - Fri Jun 19 2009 09:29 PM Re: What fasteners for this pump? wayne 60-need help! [Re: LAWFISH]
LAWFISH Offline
Petro Enthusiast

Registered: Fri Jan 16 2004
Loc: Idaho
By the way, I am doing this pump in old MOPAR colors, red, yelow and a hint of dark blue. I am going to do a custom globe in one of these logos. Any suggestions on how to do one??? I was going to buy a metal ring and frosted center and have a custom set of show through decals made???? any other suggestions?

Thanks, and what ya think??? I actually have a set of purgl DODGE and PLYMOUTH globes, but blue and white were boaring, so i went with custom stuff???

Thanks for any help

Dave


Attachments
DSCF8122.JPG

DSCF8123.JPG

DSCF8124.JPG

DSCF8125.JPG



Top
#143375 - Fri Jun 19 2009 09:46 PM Re: What fasteners for this pump? wayne 60-need help! [Re: LAWFISH]
Dick Bennett Offline
Veteran Member

Registered: Wed Oct 25 2000
Loc: Santa Paula, Calif
Gaspumpheaven.com will have most of the fasteners you will need.
T-way graphics can help on custom signs & the globe.

Do it correct & it will show in the end results.
Or go the -M I C K E Y M O U S E- way & you will regret it later.
[if the clock face is a dummy 866, use the correct I.D. Plate & knob on the side, not a crank back for a 60 computer].

Top
#143378 - Fri Jun 19 2009 10:31 PM Re: What fasteners for this pump? wayne 60-need help! [Re: Dick Bennett]
LAWFISH Offline
Petro Enthusiast

Registered: Fri Jan 16 2004
Loc: Idaho
Originally Posted By: Dick Bennett
Gaspumpheaven.com will have most of the fasteners you will need.
T-way graphics can help on custom signs & the globe.

Do it correct & it will show in the end results.
Or go the -M I C K E Y M O U S E- way & you will regret it later.
[if the clock face is a dummy 866, use the correct I.D. Plate & knob on the side, not a crank back for a 60 computer].


Yes, they are repop clock faces. I bought it with them. It was someone elses project and they gave up.

I will do a web search for Tway graphics. Are they petrolina related or just a a graphics company/

Thanks Dave

Top
#143379 - Fri Jun 19 2009 10:33 PM Re: What fasteners for this pump? wayne 60-need help! [Re: LAWFISH]
Ron Scobie Offline
Veteran Member

Registered: Sat Dec 02 2000
Loc: Hugo, MN, USA
Dave,
If you prefer stainless steel twist fasteners instead of aluminum give me an email.
Ron
_________________________
Ron Scobie
http://www.gaspump.com or
rscobie(TheAtSymbol)gaspump.com
Phone - Six five one-653-6503

Top
#143380 - Fri Jun 19 2009 10:51 PM Re: What fasteners for this pump? wayne 60-need help! [Re: Ron Scobie]
Dick Bennett Offline
Veteran Member

Registered: Wed Oct 25 2000
Loc: Santa Paula, Calif

Top
#143381 - Fri Jun 19 2009 11:26 PM Re: What fasteners for this pump? wayne 60-need help! [Re: Dick Bennett]
LAWFISH Offline
Petro Enthusiast

Registered: Fri Jan 16 2004
Loc: Idaho


Thanks for th elinks. I still have to finish painting and masking off the top and front to match. the raised area will be inset.

Dave

Top
#143382 - Sat Jun 20 2009 12:24 AM Re: What fasteners for this pump? wayne 60-need help! [Re: LAWFISH]
bruzer75 Offline
Veteran Member

Registered: Fri Sep 22 2006
Loc: Grants Pass, OR, USA
I like it, I like it alot. Very nice so far.
Mike

Top
#143393 - Sat Jun 20 2009 08:58 AM Re: What fasteners for this pump? wayne 60-need help! [Re: LAWFISH]
Ron Scobie Offline
Veteran Member

Registered: Sat Dec 02 2000
Loc: Hugo, MN, USA
Dave,
I received your email. Thanks. Here's a photo of the twister and paint protector. The pump is a Wayne 40 but the slot and protector is the same. Wayne used the slots & twisters on at least four models.
Ron
_________________________
Ron Scobie
http://www.gaspump.com or
rscobie(TheAtSymbol)gaspump.com
Phone - Six five one-653-6503

Top
#143399 - Sat Jun 20 2009 09:37 AM Re: What fasteners for this pump? wayne 60-need help! [Re: Ron Scobie]
BLange Offline
Petro Enthusiast

Registered: Wed Oct 12 2005
Loc: Cedar Rapids, IA
Used the Ron's hardware on my Wayne 40, Great quality and look great.

Brian
_________________________
Always looking for SKELLY items.

Top
#143400 - Sat Jun 20 2009 09:56 AM Re: What fasteners for this pump? wayne 60-need help! [Re: BLange]
K W FRITH Online   content
Veteran Member

Registered: Sun Oct 21 2007
Loc: Devils Lake, ND---USA
Hey--Scobie didn't mention it but he also carries the special bolts that go into the curved top and the ones for the faceplates! You can get them in brass or stainless! I used Rons fasteners on my last restoration and they are of very high quality!
Keep up the pictures as you go!---KEVIN
_________________________
Everything Cities Service
Specializing in old Gas Pumps
kwfrith@gondtc.com
Cell#-701-739-6133

Top
#143606 - Mon Jun 22 2009 12:49 PM Re: What fasteners for this pump? wayne 60-need help! [Re: Ron Scobie]
LAWFISH Offline
Petro Enthusiast

Registered: Fri Jan 16 2004
Loc: Idaho
Originally Posted By: Ron Scobie
Dave,
I received your email. Thanks. Here's a photo of the twister and paint protector. The pump is a Wayne 40 but the slot and protector is the same. Wayne used the slots & twisters on at least four models.
Ron


a WAYNE 40? ok, THANKS, IS ANYTHING ELSE DIFFERENT? OR should I be checking a different section for parts and the curved top bezel??


I still have to tape off and repaint the top, curved and face piecews as I am going for that frame din look.

like this attached one.
Thanks

Dave


Attachments
polly%20wayne%2060[1].jpg



Top
#143638 - Mon Jun 22 2009 08:20 PM Re: What fasteners for this pump? wayne 60-need help! [Re: K W FRITH]
LAWFISH Offline
Petro Enthusiast

Registered: Fri Jan 16 2004
Loc: Idaho
Whats the difference between a WAYNE 40 AND WAYNE 60?

THANKS Dave

Top
#161783 - Wed Nov 25 2009 12:05 PM Re: What fasteners for this pump? wayne 60-need help! [Re: LAWFISH]
LAWFISH Offline
Petro Enthusiast

Registered: Fri Jan 16 2004
Loc: Idaho
Originally Posted By: LAWFISH
Originally Posted By: Ron Scobie
Dave,
I received your email. Thanks. Here's a photo of the twister and paint protector. The pump is a Wayne 40 but the slot and protector is the same. Wayne used the slots & twisters on at least four models.
Ron


a WAYNE 40? ok, THANKS, IS ANYTHING ELSE DIFFERENT? OR should I be checking a different section for parts and the curved top bezel??


I still have to tape off and repaint the top, curved and face piecews as I am going for that frame din look.

like this attached one.
Thanks

Dave


I need a little help. I ma back on this project and I need to order the globe top bezel. since its a wayne 40 and not a 60, is it the same globe bezel or different? I dont see one for the wayne 40. I also need to order the parts from Ron for the front and rear panels.

Thanks for any advise


I go between, muscle cars, trucks and back to coke machines and pumps, depending on time and $$$$$, so I have these lapses. thanks for any help.

is this the right one for my top???? http://www.gaspumpheaven.com/GPH/Scripts/prodView.asp?idproduct=1886


Dave

Top

Moderator:  Oldgas, Ryan Underthun, Watchdog9 

Click on magnifying glass icon on lower left to search eBay

Copyright © 2017 Primarily Petroliana Interactive, All Rights Reserved