Oldgas.com Home

Home | Help | Events | Books | Pictures | Auctions | Links | Collectors | Parts | Contact

Topic Options
#18259 - Fri Feb 02 2007 07:00 PM My Veeder Root For My Bennett 646
Mr Bill Offline
Petro Enthusiast

Registered: Wed Jan 17 2007
Loc: La Verne
Hello fellows, O-Kay here is my Veeder Root all done it took me three days to finish it. Things with this many gears light my fire, kind of reminds me of when I restored my Mills High Top Slot machine lots of fun. Oh and another thing I did most of it on the wifeís kitchen counter top because it had been raining out side and the garage well lets just say thereís to many projects going on in there. She was not to happy. I donít know about proper color or how it came from the factory what I do know is that itís pleasing to my eye.

Thanks again for all the help on line and email,

Bill,

_________________________
Bill

Top
Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
#18260 - Fri Feb 02 2007 07:05 PM Re: My Veeder Root For My Bennett 646
Mr Bill Offline
Petro Enthusiast

Registered: Wed Jan 17 2007
Loc: La Verne
Click or copy and paste this link for pictures..I hope,
http://s51.photobucket.com/albums/f398/williamsroadster/Veeder%20Root%20Restored/?start=all
_________________________
Bill

Top
#18261 - Fri Feb 02 2007 07:35 PM Re: My Veeder Root For My Bennett 646
bruzer75 Offline
Veteran Member

Registered: Fri Sep 22 2006
Loc: Grants Pass, OR, USA
Looks awesome! Your Wife has a very nice bench top too. You are very lucky she did not club you over the head for using it. LOL
Mike

Top
#18262 - Fri Feb 02 2007 08:09 PM Re: My Veeder Root For My Bennett 646
blacktee Offline
Veteran Member

Registered: Mon Jan 17 2005
Loc: Saline, Mi USA
I'm impressed !!! How did you get the wheels so clean ? New, Repaint them ?

Nice Job !

Top
#18263 - Fri Feb 02 2007 08:10 PM Re: My Veeder Root For My Bennett 646
travis_towle Offline
Veteran Member

Registered: Wed Jan 22 2003
Loc: Topeka, Kansas USA
SWEET!!!!!!!!!!!!


ME LIKEA


Travis E. Towle
Topeka, Kansas

785-357-1004

Top
#18264 - Sat Feb 03 2007 04:08 PM Re: My Veeder Root For My Bennett 646
Mr Bill Offline
Petro Enthusiast

Registered: Wed Jan 17 2007
Loc: La Verne
Thanks for the kind words guys!

Blackteetexacogold,

To clean the wheels I used a couple of cans of Parts Wash you can see the can in picture # DSC00084 as I was spraying I used a small paint brush that I cut the hairs down very short to stiffening up things a bit but still not enough to scratch the numbers. Also I did paint a few of the numbers white and the back ground in black. I used a pin stripe brush and (One Shot paint) then polished all the wheels. Got to run should be time for one more coat of primer sealer. Iíll post a few picture later this evening.
Bill
_________________________
Bill

Top
#18265 - Sun Feb 04 2007 06:57 AM Re: My Veeder Root For My Bennett 646
Vermonter Offline
Veteran Member

Registered: Sat Dec 16 2006
Loc: VT
Bill,
Really nice! Im working on mine now. How did you get that corrosion off? What parts did you actually paint, just the numbers? Looks great
John
_________________________
Wanted: Original Jenney Gas, Husky, Marathon, and Frontier Globes

Top
#18266 - Sun Feb 04 2007 07:32 AM Re: My Veeder Root For My Bennett 646
jkyocom Offline
Veteran Member

Registered: Fri Dec 15 2006
Loc: GA
Mr Bill,
Now you know what I go through every day. Good job !!!
One hint.....take gears off top of variator and build right side up....much easier... Build ,then put range arm plates in last.
Joe
_________________________
Veeder Root Rebuilds.....since 1987
Veeder Root Identification CD
Clock Repair
jkyocom@bellsouth.net

Top
#18267 - Sun Feb 04 2007 11:09 AM Re: My Veeder Root For My Bennett 646
Mr Bill Offline
Petro Enthusiast

Registered: Wed Jan 17 2007
Loc: La Verne
Hey Joe thanks for the tip, now you tell me. I new I should have asked one of the pros. I must admit there were a couple of times I had to walk away as Iím telling my self you just couldnít leave well enough alone but thatís who I am itís the gears, wheels, and sprockets that suck me in every time. I like the idea that I can slide the door open and change the price of gas; you just know someone will ask that question. Hey! got to get out side got some panel work and primer to spray. .Oh, I moved the pump to the living when the wife wasnít looking!!! LoL

Thanks again for the help.
Bill

_________________________
Bill

Top
#18268 - Sun Feb 04 2007 04:49 PM Re: My Veeder Root For My Bennett 646
jkyocom Offline
Veteran Member

Registered: Fri Dec 15 2006
Loc: GA
Here is one for everyone.....I had built computers for several years before I realized
that the bell on a computer has the hole off center.....this is so you can turn it to make it a louder or softer chime...D'OH !!!
Joe
_________________________
Veeder Root Rebuilds.....since 1987
Veeder Root Identification CD
Clock Repair
jkyocom@bellsouth.net

Top

Moderator:  Oldgas, Ryan Underthun, Watchdog9 

Click on magnifying glass icon on lower left to search eBay

Copyright © 2017 Primarily Petroliana Interactive, All Rights Reserved