|
#18259
Fri Feb 02 2007 06:00 PM
|
Joined: Jan 2007
Posts: 108
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Jan 2007
Posts: 108 |
Hello fellows, O-Kay here is my Veeder Root all done it took me three days to finish it. Things with this many gears light my fire, kind of reminds me of when I restored my Mills High Top Slot machine lots of fun. Oh and another thing I did most of it on the wife’s kitchen counter top because it had been raining out side and the garage well lets just say there’s to many projects going on in there. She was not to happy. I don’t know about proper color or how it came from the factory what I do know is that it’s pleasing to my eye. Thanks again for all the help on line and email, Bill,
Bill
|
|
|
Please - NO offers to Buy or Sell in this forum category
Statements such as, "I'm thinking about selling this." are considered an offer to sell.
|
|
#18260
Fri Feb 02 2007 06:05 PM
|
Joined: Jan 2007
Posts: 108
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Jan 2007
Posts: 108 |
Click or copy and paste this link for pictures..I hope, http://s51.photobucket.com/albums/f398/williamsroadster/Veeder%20Root%20Restored/?start=all
Bill
|
|
|
#18261
Fri Feb 02 2007 06:35 PM
|
Joined: Sep 2006
Posts: 3,622 Likes: 1
Veteran Member
|
Veteran Member
Joined: Sep 2006
Posts: 3,622 Likes: 1 |
Looks awesome! Your Wife has a very nice bench top too. You are very lucky she did not club you over the head for using it. LOL Mike
|
|
|
#18262
Fri Feb 02 2007 07:09 PM
|
Joined: Jan 2005
Posts: 2,702
Veteran Member
|
Veteran Member
Joined: Jan 2005
Posts: 2,702 |
I'm impressed !!! How did you get the wheels so clean ? New, Repaint them ?
Nice Job !
|
|
|
#18263
Fri Feb 02 2007 07:10 PM
|
Joined: Jan 2003
Posts: 1,479
Veteran Member
|
Veteran Member
Joined: Jan 2003
Posts: 1,479 |
SWEET!!!!!!!!!!!!
ME LIKEA
Travis E. Towle Topeka, Kansas
785-357-1004
|
|
|
#18264
Sat Feb 03 2007 03:08 PM
|
Joined: Jan 2007
Posts: 108
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Jan 2007
Posts: 108 |
Thanks for the kind words guys!
Blackteetexacogold,
To clean the wheels I used a couple of cans of Parts Wash you can see the can in picture # DSC00084 as I was spraying I used a small paint brush that I cut the hairs down very short to stiffening up things a bit but still not enough to scratch the numbers. Also I did paint a few of the numbers white and the back ground in black. I used a pin stripe brush and (One Shot paint) then polished all the wheels. Got to run should be time for one more coat of primer sealer. I’ll post a few picture later this evening. Bill
Bill
|
|
|
#18265
Sun Feb 04 2007 05:57 AM
|
Joined: Dec 2006
Posts: 1,550
Veteran Member
|
Veteran Member
Joined: Dec 2006
Posts: 1,550 |
Bill, Really nice! Im working on mine now. How did you get that corrosion off? What parts did you actually paint, just the numbers? Looks great John
Wanted: Original Jenney Gas, Husky, Marathon, and Frontier Globes
|
|
|
#18266
Sun Feb 04 2007 06:32 AM
|
Joined: Dec 2006
Posts: 3,369 Likes: 7
Veteran Member
|
Veteran Member
Joined: Dec 2006
Posts: 3,369 Likes: 7 |
Mr Bill, Now you know what I go through every day. Good job !!! One hint.....take gears off top of variator and build right side up....much easier... Build ,then put range arm plates in last. Joe
Veeder Root Rebuilds.....since 1987 Veeder Root Identification CD Gas Pump Clock Repair jkyocom@bellsouth.net
|
|
|
#18267
Sun Feb 04 2007 10:09 AM
|
Joined: Jan 2007
Posts: 108
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Jan 2007
Posts: 108 |
Hey Joe thanks for the tip, now you tell me. I new I should have asked one of the pros. I must admit there were a couple of times I had to walk away as I’m telling my self you just couldn’t leave well enough alone but that’s who I am it’s the gears, wheels, and sprockets that suck me in every time. I like the idea that I can slide the door open and change the price of gas; you just know someone will ask that question. Hey! got to get out side got some panel work and primer to spray. .Oh, I moved the pump to the living when the wife wasn’t looking!!! LoL Thanks again for the help. Bill
Bill
|
|
|
#18268
Sun Feb 04 2007 03:49 PM
|
Joined: Dec 2006
Posts: 3,369 Likes: 7
Veteran Member
|
Veteran Member
Joined: Dec 2006
Posts: 3,369 Likes: 7 |
Here is one for everyone.....I had built computers for several years before I realized that the bell on a computer has the hole off center.....this is so you can turn it to make it a louder or softer chime...D'OH !!! Joe
Veeder Root Rebuilds.....since 1987 Veeder Root Identification CD Gas Pump Clock Repair jkyocom@bellsouth.net
|
|
|
|
|
|