Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Bennett 646 hinges

Does anyone have a photo of the hinge and/or it mounted to this pump. Bought a pump without doors-picked up doors but they dont have hinges on them. I can see where they mount to door but not sure what they look like or how they attach to pump. I did find some online that said they were for this model that look like a pin type hinge???

The hinges are two part. One goes on the door and one on the frame. Here is a photo.



Uploaded with ImageShack.us

Well the ones I saw are the hinge part that goes on the door--thanks Matt--thats just what I was looking for.

Does anyone know of a place that sells the part that mounts on the side panels (silver part in this photo)?? All the hinge parts are there on mine but they are broken off about an inch out--guess I could fab/weld the rest on but if they sell them.

So I prob should have asked when I asked about the hinges--does the globe mount in a similar fashion to block off plate?? The blockoff plate is held down with tabs from the underside on mine. Is it pretty evident how it mounts if you buy one.

And to be a further bother--I see the painted part for the door glass--is that a backer?? Do the chrome front parts on front bolt to this?? Or is yours just painted on this pump? If so guess I'm missing that as well???

Disregard on a place to buy the hinges--I see gas pump heaven has them (same place that has the other part--guess I should pay more attention lol)

Still wondering about other things however

If someone is picture happy-- any photos of the nozzle it should have?? I dont believe mines correct--its got a self shutoff arm on the bottom--with the three different notches in it. Wouldnt think they had those

There is a frame that goes inside the door for the glass. Here is a pic of Gas Pump Heavens 646 globe holder from the inside. I think an original is differant.



Uploaded with ImageShack.us



Uploaded with ImageShack.us

Thanks again Matt-- I"ll add that item to my order I'm going to place with them.

Guess I have to locate a set of frames at some point then as well.

The Pump Dump has the window frame http://thepumpdump.com/ . Look under Bennett then 756, 766. They are the same as a 646. If he is out you can try Tom Buckles.

Ok I think I'm a goof--- Is this the part I'm looking for?? For some reason I was thinking this was a chrome outer part. Hard when you dont have even damaged originals to beging with---

http://www.gaspumpheaven.com/GPH/Scripts/prodView.asp?idproduct=2516

I think I'm getting it--the glass is held against the outer door by this panel?? With a seal it must be?? Then a divider strip between the upper and lower sections of glass??

Is this the part I'm looking for??
YES & w/ a U shape rubber around the glass edge for a seal.

Looks like the hinges may be the same also?