#296556
Wed Jan 11 2012 11:23 AM
|
Joined: Jul 2011
Posts: 18
Member
|
OP
Member
Joined: Jul 2011
Posts: 18 |
I need the switch to turn the lights on and off. Also the pump had the 4 digit computer in it when I got it, which I have since changed back to the 3 digit computer, but now the rods for the reset are too short on both sides. So I would like all 3 rods (two on the crank side and one on the hose side) and all of the aluminum ends for the rods, including the ones on the computer. I am not sure if anything I have is correct, so I would just like to get an entire setup that I know is correct. let me know what you have or send pics to racer6747@gmail.com, email is the best way to reach me, thanks.
John
|
|
|
|
Joined: Oct 2007
Posts: 12,282 Likes: 12
Veteran Member
|
Veteran Member
Joined: Oct 2007
Posts: 12,282 Likes: 12 |
I have the switch setup that you need and I have all kinds of the computer connecting rods, but I don't know what length is correct? If you know the length, I can probably find some for you. I assume that by "ends" you are referring to the slotted pieces attached to the computer, that the connecting rod slides into? Not sure but I may have a couple of those?
Everything Cities Service Specializing in old Gas Pumps kwfrith@gondtc.com Cell#-701-739-6133
|
|
|
|
Joined: Nov 2002
Posts: 4,962 Likes: 17
Moderator
|
Moderator
Joined: Nov 2002
Posts: 4,962 Likes: 17 |
If Kevin cannot help you, I have the rods.
FREEDOM oil items wanted.
|
|
|
|
Joined: Jul 2011
Posts: 18
Member
|
OP
Member
Joined: Jul 2011
Posts: 18 |
Thanks guys, ill go home and try to get a measurement tonight, and yes im talking about the slotted pieces.
|
|
|
|
Joined: Oct 2007
Posts: 12,282 Likes: 12
Veteran Member
|
Veteran Member
Joined: Oct 2007
Posts: 12,282 Likes: 12 |
I leave for Columbia in the morning and won't be able to help until next week. If you're in a hurry, it sounds like Ryan probably has the parts. Maybe give him a call and see if he can fill the bill. I'll be back on monday if he doesn't have everything that you need.-----KEVIN
Everything Cities Service Specializing in old Gas Pumps kwfrith@gondtc.com Cell#-701-739-6133
|
|
|
|
Joined: Oct 2007
Posts: 12,282 Likes: 12
Veteran Member
|
Veteran Member
Joined: Oct 2007
Posts: 12,282 Likes: 12 |
OK--I'm back in the area again and ready to help if you need it! Was Ryan able to get you everything you needed? If not, just let me know. Thanks---KEVIN
Everything Cities Service Specializing in old Gas Pumps kwfrith@gondtc.com Cell#-701-739-6133
|
|
|
|
Joined: Jul 2011
Posts: 18
Member
|
OP
Member
Joined: Jul 2011
Posts: 18 |
Still looking for the reset crank rods. i also need a reset crank, hose outlet bezel, hose retract bezel, and hose guards (the angled type) all need to be in good condition with no or minimal pitting. thanks.
|
|
|
|
Joined: Dec 2001
Posts: 3,004 Likes: 27
Veteran Member
|
Veteran Member
Joined: Dec 2001
Posts: 3,004 Likes: 27 |
Drive with Care and Buy Sinclair!! I buy Sinclair globes, signs, cans, ect.
|
|
|
|
|