Oldgas.com Home  
Home | Help | Events | Auctions | Parts | Contact
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
wayne 492 roman petrol pump parts wanted #317757
Sun Apr 08 2012 06:50 PM
Sun Apr 08 2012 06:50 PM
Joined: Apr 2012
Posts: 17
South Australia
S
Stuart Norris Offline OP
Member
Stuart Norris  Offline OP
Member
S
Joined: Apr 2012
Posts: 17
South Australia
Stuart here from sunny South Australia. I need parts for my wayne roman 492 petrol pump. i need original(the valves & levers that bolt up under the neck)below where the glass bowl sits. Also need the three original base plates that bolt into the base.Any help or leads would be greatly appreciated.Regards Stuart

Re: wayne 492 roman petrol pump parts wanted [Re: Stuart Norris] #317797
Sun Apr 08 2012 09:49 PM
Sun Apr 08 2012 09:49 PM
Joined: Mar 2002
Posts: 1,405
California
Gas Pump Rob Offline
Veteran Member
Gas Pump Rob  Offline
Veteran Member
Joined: Mar 2002
Posts: 1,405
California
If you cannot find originals you can contact Ron Scobie Enterprises for nice repro base access doors (they fit nicely)made of cast iron.
Rob

Last edited by Gas Pump Rob; Sun Apr 08 2012 09:50 PM.
Re: wayne 492 roman petrol pump parts wanted [Re: Gas Pump Rob] #317805
Mon Apr 09 2012 03:17 AM
Mon Apr 09 2012 03:17 AM
Joined: Apr 2012
Posts: 17
South Australia
S
Stuart Norris Offline OP
Member
Stuart Norris  Offline OP
Member
S
Joined: Apr 2012
Posts: 17
South Australia
yes, thanks for that, i know Ron makes the base plates and the levers but he doesnt make the valves the levers go on so i need some original valves. Someone had some on us ebay about 12 months ago(i missed them as wasnt watching that week) a friend contacted me after they had sold on ebay to tell me,i could have killed him for not letting me know when they were on there.Regards Stuart

wayne roman 492 valve fittings needed #328408
Sat May 26 2012 04:42 PM
Sat May 26 2012 04:42 PM
Joined: Apr 2012
Posts: 17
South Australia
S
Stuart Norris Offline OP
Member
Stuart Norris  Offline OP
Member
S
Joined: Apr 2012
Posts: 17
South Australia
Stuart here from Australia. I Still Desperately need the valves and levers that bolt up under the neck of my wayne roman 492 petrol pump. No-one makes these valves & their mountings so i need originals. Contact me on kingtut1@bigpond.com

Re: wayne 492 roman petrol pump parts wanted [Re: Stuart Norris] #329189
Tue May 29 2012 04:14 PM
Tue May 29 2012 04:14 PM
Joined: Oct 2000
Posts: 22,780
Santa Paula, Calif
Dick Bennett Offline
Veteran Member
Dick Bennett  Offline
Veteran Member
Joined: Oct 2000
Posts: 22,780
Santa Paula, Calif
Hope this helps in your quest for parts & how the valves work. The Ball valve handle next to Fig. 2[in drawing] is only on the 491 Air Operated pumps.
Roman Patent

Valves your looking for are 1 1/4" quick-shutoff.

Last edited by Dick Bennett; Tue May 29 2012 04:21 PM.
Re: wayne 492 roman petrol pump parts wanted [Re: Dick Bennett] #330808
Mon Jun 04 2012 05:12 PM
Mon Jun 04 2012 05:12 PM
Joined: Oct 2000
Posts: 22,780
Santa Paula, Calif
Dick Bennett Offline
Veteran Member
Dick Bennett  Offline
Veteran Member
Joined: Oct 2000
Posts: 22,780
Santa Paula, Calif

Re: wayne 492 roman petrol pump parts wanted [Re: Dick Bennett] #330821
Mon Jun 04 2012 06:05 PM
Mon Jun 04 2012 06:05 PM
Joined: Jan 2009
Posts: 5,156
Portland Oregon
C
Craig Osbeck Offline
Veteran Member
Craig Osbeck  Offline
Veteran Member
C
Joined: Jan 2009
Posts: 5,156
Portland Oregon
Yea, that is an easy diagram to read.


Craig
Re: wayne 492 roman petrol pump parts wanted [Re: Stuart Norris] #331435
Thu Jun 07 2012 09:17 AM
Thu Jun 07 2012 09:17 AM
Joined: Dec 2000
Posts: 1,456
Hugo, MN, USA
Ron Scobie Offline
Veteran Member
Ron Scobie  Offline
Veteran Member
Joined: Dec 2000
Posts: 1,456
Hugo, MN, USA
Stuart,
As we discussed on the phone this is the part that I make.
Ron


Uploaded with ImageShack.us


Ron Scobie
http://www.gaspump.com or
rscobie(TheAtSymbol)gaspump.com
Phone - Six five one-653-6503
Re: wayne 492 roman petrol pump parts wanted #352320
Thu Aug 30 2012 05:19 PM
Thu Aug 30 2012 05:19 PM
Joined: Apr 2012
Posts: 17
South Australia
S
Stuart Norris Offline OP
Member
Stuart Norris  Offline OP
Member
S
Joined: Apr 2012
Posts: 17
South Australia
i need the fittings that bolt up underneath the glass bowl with the valves & the fill bowl lever & release lever that hide behind the scrolls on my Wayne Roman 492 petrol pump. Also need an original set of three covers that sit in the base on pump.Someone must be able to help. Contact Stuart(from sunny South Australia) here or email me on kingtut1@bigpond.com

Re: wayne 492 roman petrol pump parts wanted #369108
Sat Nov 10 2012 01:24 AM
Sat Nov 10 2012 01:24 AM
Joined: Apr 2012
Posts: 17
South Australia
S
Stuart Norris Offline OP
Member
Stuart Norris  Offline OP
Member
S
Joined: Apr 2012
Posts: 17
South Australia
i still need the fittings & valves that bolt up under the neck of my wayne roman 492 petrol pump. also need the levers that bolt to the valves. one with original lock.also need the three original base plates.Contact Stuart here or email me in australia at kingtut1@bigpond.com

Re: wayne 492 roman petrol pump parts wanted [Re: Dick Bennett] #375908
Fri Dec 07 2012 11:10 PM
Fri Dec 07 2012 11:10 PM
Joined: Apr 2012
Posts: 17
South Australia
S
Stuart Norris Offline OP
Member
Stuart Norris  Offline OP
Member
S
Joined: Apr 2012
Posts: 17
South Australia
nothing in my pm box

Re: wayne 492 roman petrol pump parts wanted #413111
Mon Apr 29 2013 05:07 PM
Mon Apr 29 2013 05:07 PM
Joined: Apr 2012
Posts: 17
South Australia
S
Stuart Norris Offline OP
Member
Stuart Norris  Offline OP
Member
S
Joined: Apr 2012
Posts: 17
South Australia
Stuart here from south australia. Im still looking to buy the fittings that bolt up under the neck & the valves that screw onto them & the release handles,especially the one with the lock in it for my Wayne Roman 492 petrol pump. Also need an original set of Base Doors with locks.Ive Been Trying To Get These For a few years Now & cant Finish Rebuilding My Pump Till i find Some. Please Help Me. Regards Stuart

Re: wayne 492 roman petrol pump parts wanted [Re: Stuart Norris] #413118
Mon Apr 29 2013 05:21 PM
Mon Apr 29 2013 05:21 PM
Joined: Jan 2009
Posts: 5,156
Portland Oregon
C
Craig Osbeck Offline
Veteran Member
Craig Osbeck  Offline
Veteran Member
C
Joined: Jan 2009
Posts: 5,156
Portland Oregon
IF some one has a picture, I might have something.


Craig
Re: wayne 492 roman petrol pump parts wanted [Re: Craig Osbeck] #413179
Mon Apr 29 2013 07:52 PM
Mon Apr 29 2013 07:52 PM
Joined: Mar 2002
Posts: 1,405
California
Gas Pump Rob Offline
Veteran Member
Gas Pump Rob  Offline
Veteran Member
Joined: Mar 2002
Posts: 1,405
California
Gas Pump Heaven sells valves that will work.

Rob

Re: wayne 492 roman petrol pump parts wanted [Re: Gas Pump Rob] #413196
Mon Apr 29 2013 09:12 PM
Mon Apr 29 2013 09:12 PM
Joined: Oct 2000
Posts: 22,780
Santa Paula, Calif
Dick Bennett Offline
Veteran Member
Dick Bennett  Offline
Veteran Member
Joined: Oct 2000
Posts: 22,780
Santa Paula, Calif
Ask Ron Scobie [member]

Page 1 of 2 1 2

Moderated by  Oldgas, Ryan Underthun 

Click for an eBay Search Form and lots more live petro auction listings

Copyright © 2018 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.6.1.1
(Release build 20180111)
Page Time: 0.026s Queries: 15 (0.006s) Memory: 1.9167 MB (Peak: 2.0553 MB) Zlib disabled. Server Time: 2018-07-19 13:49:17 UTC