Stuart here from sunny South Australia. I need parts for my wayne roman 492 petrol pump. i need original(the valves & levers that bolt up under the neck)below where the glass bowl sits. Also need the three original base plates that bolt into the base.Any help or leads would be greatly appreciated.Regards Stuart
yes, thanks for that, i know Ron makes the base plates and the levers but he doesnt make the valves the levers go on so i need some original valves. Someone had some on us ebay about 12 months ago(i missed them as wasnt watching that week) a friend contacted me after they had sold on ebay to tell me,i could have killed him for not letting me know when they were on there.Regards Stuart
wayne roman 492 valve fittings needed#328408 Sat May 26 201204:42 PMSat May 26 201204:42 PM
Stuart here from Australia. I Still Desperately need the valves and levers that bolt up under the neck of my wayne roman 492 petrol pump. No-one makes these valves & their mountings so i need originals. Contact me on email@example.com
i need the fittings that bolt up underneath the glass bowl with the valves & the fill bowl lever & release lever that hide behind the scrolls on my Wayne Roman 492 petrol pump. Also need an original set of three covers that sit in the base on pump.Someone must be able to help. Contact Stuart(from sunny South Australia) here or email me on firstname.lastname@example.org
Re: wayne 492 roman petrol pump parts wanted#369108 Sat Nov 10 201201:24 AMSat Nov 10 201201:24 AM
i still need the fittings & valves that bolt up under the neck of my wayne roman 492 petrol pump. also need the levers that bolt to the valves. one with original lock.also need the three original base plates.Contact Stuart here or email me in australia at email@example.com
Re: wayne 492 roman petrol pump parts wanted
[Re: Dick Bennett]
#375908 Fri Dec 07 201211:10 PMFri Dec 07 201211:10 PM
Stuart here from south australia. Im still looking to buy the fittings that bolt up under the neck & the valves that screw onto them & the release handles,especially the one with the lock in it for my Wayne Roman 492 petrol pump. Also need an original set of Base Doors with locks.Ive Been Trying To Get These For a few years Now & cant Finish Rebuilding My Pump Till i find Some. Please Help Me. Regards Stuart
Stuart Here from south Australia. I Am Still Trying to get The Fittings that bolt up under the neck of my wayne 492 roman & the valves & Levers that go on them.There are 3 Fittings,one has the Pump Hose fitting on it,one has the release valve and the other has the other valve go on it. Any Help Appreciated as i want to finish this pump but cant until i source these items.Also looking to buy a Set of 3 Original base fittings with the writing on & Locks.Contact me here.
Re: wayne 492 roman petrol pump parts wanted#570875 Sat Sep 27 201402:55 AMSat Sep 27 201402:55 AM
Hi Guys, Im Still Needing the Original Fittings, Levers & The Valves That Bolt up Under The Neck Behind The Scroles On My Wayne Roman 492 Petrol Pump. Also Looking For The 3 original Base Plates for The pump as well.
Re: wayne 492 roman petrol pump parts wanted#603993 Wed Mar 18 201503:45 AMWed Mar 18 201503:45 AM
Stuart Here From Australia, Three Years Ive been Trying To Find The 2 Valves,2 Levers(one with key lock) & The Fittings That Bolt Up Under The Neck(one has 3 bolt holes,one has 4) Of My Wayne Roman 492 Pump.Also Looking For The 3 Original Base Plates For The Petrol Pump. Please Help.