Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Sunoco Ad Glass installation????

I'm restoreing a M&S 80 pump with Ad Glass, Question?? Do I put the rubber around the glass first then around the top?? Or do I put the rubber aroumd the top first then try to put the glass in?? Are there any tricks I should know??? Thank You Don

If you are talking about the adglass top, I always position the rubber into the top first. Be sure to lay the top on a soft surface to prevent scratching the paint. Using a nylon bone, you can work the rubber up over the adglass on all sides. Good luck, Paul www.severngaspumps.com

NEVER push hard on one area of the glass to try and force it into the top. This is a sure way to break the glass. I have never used a tool to install the glass. I put the rubber on the glass, then use just my finger to pull the rubber around the lip on the top.

Hint: If you do use a nylon bone or plastic stick for a tool, use really soapy water with it. This really helps when you put curved glass windows in a 900/1000 series Bennett. Good Luck,
Goober

I want to thank ALL for there help in getting this glass in, I tried both ways and found putting rubber around glass then putting in top worked best for me!!!! Thanks Don

Hey
I have 2 add glasses and the top,which rubber does it take.
Thanks Bill

It takes rubber #R102 (Gas Pump Heaven) 402-592-1710