Hey guys I need your help. I just picked up a Wayne 60 and not knowing much about the Wayne brand how do you tell the difference between a narrow body and a wide body as I need to find a new base for it being the cast is broken. I can post pictures if it helps.

Do you have a picture? Here is mine wide

Here is my wide...I just got it also
Did the showcase wayne 60's NOT have a globeholder?
Because my top is a little different...

Narrow base is about 2-3 inches smaller. I think the regular is 29 1/2 or is that the other way around

Look at the frame rails on the front of the pump. On the wide body 2" will be showing and on the narrow 1/2" will be showing. Richard

Thanks guys.. I took Richards information mine has two inches exposed so it is a wide thanks fits

Narrow is 26.5" wide and the wide base is 29.5" wide

They are different side to side and front to back.

Take that base to a competent welding shop and get it welded up. Easy to do as long as there are no pieces missing!

Tom--The showcase pumps could have come with or without a globe holder. My showcase has the same holder as your pump and it came from the factory that way.
KEVIN

K w here are the pictures of the base and pump started tearing it down so that would explain parts missing in the photos.. just do not know if the base is salvageable. I was thinking worst case buy a reproduction base or see if u can get one from a parts guy.. your thoughts.. I am in to this pump at a very cheap price the only thing missing is the computer but I think for now I will just do the clock face inserts until I can find a computer for it.
Here us the link sorry guys do not know how to upload pictures from my phone.
http://pbckt.com/p0.UJSwLL

I agree with kevin. Mine did not have the globe holder from factory. also you should be able to weld yours,or post looking for one on here should be one out there some place.

Thanks Kevin...
Mine is 29 1/2 too so def a wide...
Id think that base would be easily welded from looking at pics
Also your doesnt have a globe holder either???
My globe holder has 2 round things coming out the sides??? Would that be for a harp light thingy or what???

The base looks repairable to me. As long as there are no chunks missing, you should be OK. If you don't want to go that way, someone should have a base available. Not sure how the repops fit? Sometimes they aren't worth the hassle.
TOM--Email me a close-up of the globe holder area. It might be that your pump had a stationlighter on top and someone just cut the harp section of it off! Kinda looks that way?

tomzcollectiblez,
Your 60 has the Fancy globe holder & the Base of a Banjo Station Lighter. Although some 15" metal bodies will fit, IMO a Glass/Capco Body looks Better [picture below is a little out of proportion!].
In 2nd picture either Banjo on right is what they look like w/o bonnets.

Thanks Dick and Kevin!!! I think your right...Ill have to go back to the farm and look for the rest of it??? LOL
Here is a shot of the FANCY top and base of stationlighter...