Oldgas.com Home

Home | Help | Events | Books | Pictures | Auctions | Links | Collectors | Parts | Contact

Topic Options
#32861 - Sun Nov 11 2001 05:10 PM Rush K lighting?
Zip's Offline
Active Member

Registered: Tue Aug 21 2001
Loc: Muscatine Iowa
Just getting done with a rush k visible. I see were the light socket goes but how is it held in place. the original stuff was missing. does it attach to the end of the 1/2" nipple that the top swings on inside the top? There was alot of a cement type material inside which i assume just sealed things up and didn't actually do any more than that.Thnaks in advance everyone.

Top
Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
#32862 - Mon Nov 12 2001 08:14 PM Re: Rush K lighting?
Gary Drye Offline
Veteran Member

Registered: Fri Oct 13 2000
Loc: Clarksville, Tn. USA
Zip, I just finished a K model a few months ago and sold it, so this reply is from my poor memory. I removed the old socket and cleaned out all the hard sealing material. There should be a small screw hole in the top of the assembly. I purchased a pre-wired rubber lined light socket, available from any hardware store and inserted it into the assembly. I used a sheet metal screw and screwed it into the top hole into the light socket rubber covering to hold it firmly in place.

Top

Moderator:  Oldgas, Ryan Underthun, Watchdog9 

Click on magnifying glass icon on lower left to search eBay

Copyright © 2017 Primarily Petroliana Interactive, All Rights Reserved