Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Restoring First Pump!!

Hello Guys, Please have Patience, as I and a friend tackle our restoration pump.
1, Ruber around door, when ordering, do they normally send enough for both doors?
2.Where do we run the electric line out of the pump from?
3.Do we screw or rivette the door rubber on?.
Can I order door rubber for a M&S 80, for my Wayne 80?
Thanks for the help, this will get us started!!
Sincerely, Butch

1. Door Rubber comes in a kit for each door you will need 10 ft of rubber and 22 rivets. Available as a kit from Gas Pump Heaven.

2. I drill a hole in the base (reset crank side as the hose side is pretty busy already) and use a rubber grommet.

3.Door rubber is riveted on with special wide flange rivets included in above kit.

4.M&S 80 rubber is same as Wayne 80 rubber.

Good luck!

Hey Butch, What ever happened to your St Louis pump?

The St. Louis pump has been sand blasted and sealed with a light green sealer. It and a couple other decent pumps are waiting for me FINSH them.I'm not machincal and low on green backs!!

Thanks, Dave this will get us moving.

6 years is a long Resto Project!
Painting w/ a 1 hair brush ? LOL
Good thing about pumps is they don't need Feeding.

Here’s where i am with my M+S 80, its my first pump too. The kept the original plate on the reset handle. i wanted to repaint on it couldn’t figure out how too. So i just polished it. One question, the nozzle side has the lead sign. What goes on the other side? Their holes there for a sign. is it a lead sign also? FYI i have the veeder root 45 i took out of it, anyone interested let me know. is works great but the numbers are off.

Both sides had a unleaded sign. How much do you want for the Veeder Root???

Its cleaned up now, places new Stickers on the lower dials and painted the exterior hammer silver. I'll add a resent pic later.

How much do you want for the veeder Root????

The Farm's Wayne/MS 80 has the ID tag on that side. About 3x3?