Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums Want to Buy Petroliana Lubester Parts

I am in search of a "gauge or dip stick" for a small lubester. If not available, do you have any ideas how I can make one? The hole for the gauge is 0.5"; other dimensions are 11" x 18" x 27" (H).
Thanks,
Mike

Each company that made dispensers had their own design. Post a picture of top.

Sorry about the delayed response to a picture. Being a new member I had a steep learning curve, but hopefully learned a lasting lesson.
Pictures of the top of my lubester.

Freeze plug, cabinet knob, and a piece of flat stock.

That is simple enough!!! Thanks for the idea.

ave one in decent shape very little rust 9/16" wide 32 " long with gallon marking from 1 to 30 with increments of 1/4 gal marking full length of dip stick on the bottom just below the 1 marking the metal is jagged about 1/2" metal tore away.
if interested let me know 910 867 5072 or email

Once had one that used a threaded rod thru a BEER Bottle Cap!