Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Need help identifying gas pumps

Hi guys

Here is a pic of the Service station I worked at as a young man back in the 70's. I'm trying to figure out what make & model the pumps are in the photo. I would like add one of these pumps to my collection.

I know this is not the best picture but I was hoping that between what I can recall about the pumps & the image, someone could help me identify the pumps. I've searched this sight as well as the web looking for images that would help figure this out but have found very little info on pumps of this era.

The details I recall that maybe helpful clues are that I think the key lock was located on the bottom edge of the SS frame for the glass rather than at the top of the lower panel. Also, the product name (REGULAR or SUPER) was located at the bottom of the glass rather than the top.

Opinions will be greatly appreciated.

Looks like the benett 3000 series pumps.

pump on the right look like a Bennett 2000 series,your in luck there is one for sale on green bay,wi craigs list under farm & garden

That is the exact design of the Shell station I had in the mid 1970s. Only exception is that my station was the reverse, the bays were on the left side of the office. It is now a transmission repair shop.

Jack Sim

Thank you guys for responding.

I did some Googling on the on both the Bennett 3000 & 2000 series. Judging from the pictures I was able to find including the one mentioned on the GB, Wis. CL ad, I don't think they can be 2000 series pumps. The 3000 series seems a little more possible but I'm not convinced of that. From what I've seen so far, A. O. Smith U-500 series, in my uneducated opinion, seem more likely. Is anyone here familiar with A. O. Smith pumps of this era?

@Jack Sim....You have a book on this subject? If so, are the A O Smith pumps covered in it?

I have a couple Bennetts. In my opinion they are not Bennetts. Bennetts don't taper in to the top and narrow out at the top like those pumps. In my opinion they are Bowser 482 or 48 series pumps.

Here's photos of my A.O.SMITH L-505.
L stood for Lighted advertising on top.
U stood for Unlighted.

The one pictured here is the exact design Shell station I worked at in 1989 in Lanham, MD.

Great info guys! TY

At this point, I'm pretty sure they are not Bennetts.

@ Cold Pizza.....Thanks for posting pics of your pump, very, very nice. I didn't know about the lighted & unlighted versions. Am I correct in assuming that lighted versions like your's flare out at the top (to accommodate the light fixture) and the unlighted version tapers in at the top? If so, I'm pretty sure the pumps in the pic are A O Smith unlighted 500 series pumps.

I have written two gas pump identification books, but unfortunately they are out of print. Well, they do show up on Ebay or Amazon if you want to spend $100+ for a copy of one of them. But, there is a E-book version available on Amazon. If you had one of these you could probably find you pump listed. In 1960 there was only a few companies making gas pumps: Bennett, Erie, Gilbarco, Keene, Smith, Tokheim and Wayne. Most of these pump are also shown on my website at: http://petrolianacollectibles.com/gas%20pump%20literature.htm.

My second book had about 1300 gas pumps shown, the book I am presently working on will have over 2000 gas pumps shown, including A.O. Smith. Probably won't be out till spring.

This page of my website is copied from my book, this will help you with the history of over 125 companies that made gas pumps. http://petrolianacollectibles.com/company_histories.htm

Check out my website, there are over 12,000 images shown.

Jack Sim

@ Jack Sim

Your web site sealed the deal for me.....I am 100% sure these are A.O. Smith 500 series pumps. Thank you so much for responding to my post. Your web site has a wealth of information, I have bookmarked it for future reference. I eagerly await the release of your book in the spring & plan on purchasing.

Now...the search begins.

.

.

@ Cold Pizza.....Rick, TY for posting these images, very, very helpful to me.

Can anyone explain the difference between a "pump" (505) and a "dispenser" (501)????

A "pump" has an actual pump & guts inside below,where the gasoline actually gets pumped & comes out of.
A "dispenser" resembles a pump on the outside,except it doesn't have a pump at all inside,but a series of pipes & valves instead,as it's actual pump is located far away from it as the gasoline is pumped to it to dispense only.