#590844
Wed Jan 07 2015 07:40 AM
|
Joined: Jan 2003
Posts: 1,311 Likes: 3
Veteran Member
|
OP
Veteran Member
Joined: Jan 2003
Posts: 1,311 Likes: 3 |
im looking for four original meter face plates for wayne 90 gas pumps thank you rock
buy/sell and collect gas station items, 315 794 8265
|
|
|
|
Joined: Dec 2004
Posts: 898 Likes: 43
Petro Enthusiast
|
Petro Enthusiast
Joined: Dec 2004
Posts: 898 Likes: 43 |
Please let me know if you find any extras. I've been try to locate a set for more than a year. I think Tom Buckles told me that he cuts down another pump model face but I don't remember if it was a Wayne 505 or some other pump. Good Luck!
Marshall
|
|
|
|
Joined: Jan 2003
Posts: 1,311 Likes: 3
Veteran Member
|
OP
Veteran Member
Joined: Jan 2003
Posts: 1,311 Likes: 3 |
MARSHALL, by the way i got a guy looking for a pair of Tokheim 850 pumps,would you have any For Sale? thanks rock
buy/sell and collect gas station items, 315 794 8265
|
|
|
|
Joined: Nov 2002
Posts: 4,962 Likes: 17
Moderator
|
Moderator
Joined: Nov 2002
Posts: 4,962 Likes: 17 |
Wayne 90 faces are IMPOSSIBLE to find. You can modify a Wayne 605 face to fit.
FREEDOM oil items wanted.
|
|
|
|
Joined: Dec 2004
Posts: 898 Likes: 43
Petro Enthusiast
|
Petro Enthusiast
Joined: Dec 2004
Posts: 898 Likes: 43 |
Rock, I sold my last extra 850 this past summer and am going to hold on to the two remaining ones for now, but thanks for the thought. Marshall
|
|
|
|
Joined: Jan 2003
Posts: 1,311 Likes: 3
Veteran Member
|
OP
Veteran Member
Joined: Jan 2003
Posts: 1,311 Likes: 3 |
ryan, thank you i will pass it on.
rock
buy/sell and collect gas station items, 315 794 8265
|
|
|
|
Joined: Mar 2008
Posts: 327
Petro Enthusiast
|
Petro Enthusiast
Joined: Mar 2008
Posts: 327 |
not to hi jack your post, but will a wayne 605 meter work in a wayne 90?
|
|
|
|
Joined: Nov 2002
Posts: 4,962 Likes: 17
Moderator
|
Moderator
Joined: Nov 2002
Posts: 4,962 Likes: 17 |
not to hi jack your post, but will a wayne 605 meter work in a wayne 90? I am not 100% sure, but would say yes..
FREEDOM oil items wanted.
|
|
|
|
Joined: Sep 2003
Posts: 1,206 Likes: 13
Veteran Member
|
Veteran Member
Joined: Sep 2003
Posts: 1,206 Likes: 13 |
The 605 faces will work just fine in a 90 if you shear the ends. At each end where the face turns up if you will, it is narrow at the bottom and gets wider towards the top. Just shear the ends so that it is the same width at the bottom all the way up. If you put the 605 plate in a 90 the door won't close because it hits at the top edge of the plate. I know this should sounds confusing but if you look at the plate I think it will be clear. If you use duct tape along where you shear it, it will help to keep the porcelain from chipping as bad, Always wear eye protection. Tom.
Always buying gas pumps and parts. Visit my web site: www.gaspumps.usBuckles Vintage Gas Pump Parts LLC Carthage Indiana
|
|
|
|
|