I'm not a big fan of how the face sits. It lays on top of the canister and floats. the outer glass lies on top and is supported by the trim ring, but there isn't a lot of pressure put on the face so it can slip around if it is on the small side. Some of the Pam faces are on the small side and thus is too small for the opening and falls in since there isn't a lot of pressure on it.
Just measure it up to see what the actual measurements are. I actually on some faces had to bend the canister in just so it wouldn't slip into the inside of the canister.
Hope this helps. Dan
Always looking for back-lit advertising clocks, prefer Telechron, American Time & Electric Time. Also Pam in good condition.
|