Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion National A38 ad glass help.

I need the rubber to mount the ad glass in my National A38.
The popular gas and oil vendors do not sell the rubber.

Any suggestions????

Thanks,
Dennis

Have you called and talked to someone as most suppliers have multiple styles that fit multiple pumps. If you look on "Past Gas" catalog page 11 it show the different styles. I know I have gotten it from Ron Scobie before.

http://www.pastgas.com/catalog.htm

This is completely up to you but I discovered that the rubber kit that you buy for the doors on a M&S 80 will fit perfectly for doing the ad glass on the curved A-38 glass. I'm not talking about the window rubber, I'm talking about the rubber door kits which are pop riveted onto the backside of the doors that press up against the pump when you close the doors. It lays down right in that channel and its wide enough to protect the glass. I don't even think I had to cut anything but the correct lengths. Good luck Dennis, it should work just fine.

Goober

I used 3M strip caulk on the last A38 I did and it worked great.