Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums Want to Buy Petroliana Eco islander Stainless roller and door needed

Still after one of these long rollers.
Thanks

Craig,
Jack Sim said that you can use 3/4" steel shaft, have the ends turned down to 1/2" and then get it chromed. Jack can probably give you better information if you need it. Another fellow told me to get 3/4" stainless rod and have the ends turned down to 1/2" by machine shop.
Ted

my original rollers measure.612. 3/4 would look odd, it would not match the top and bottom. But I guess better than not having any. Someone has them. Check with gaspumpfrank



Larry

The long rollers are easy to make but because I am involved with making parts that are needed to make the ECOs work I am not willing to make the rollers. Actually more important is having someone make the parts that hold the rollers. I get more requests for them than I do for the rollers.

The problem is there are probably 100 regular ECOs being restored for every Islander being restored.

Jack Sim

Yes, can get the stainless rods. Just cost me $125.00 to have the ends turned down and then I have to get it polished.
Looks like that is what I will have to do. Plating is even more expensive.
Thank you for trying.