Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Picture of Bennett 76 reset crank needed

I am at Iowa Gas and need a picture of a reset crank for a Bennett 76 so I know what to look for. Please text or email it. 402-984-9269 or toddtessman@yahoo.com
It would be much appreciated! Thx,Todd.

Ask Ron Scobie there, he will have one in stock or back at his place.

I have not seen him here yet. Looking for original. Still looking for a picture. Thanks.

It's cast iron and no holes in shaft.

Here is mine, but has been plated nickel but looks brass and I believe left hand thread.

Great! Thx guys for your help. Alex sent me a text. Three pics, 3 different handles. Now I am confused, :-). There is a Wayne 505 on there now and I know that is wrong. The shaft is threaded if that helps.

Here are my 76 handles. The first is from one with a visi gauge and the second is from one with a sight glass.

The second reset handle is the same basic one used on all the pumps made up to including the 900 series. It was used on the ECOs into the 1970s. The only difference between all of them is the part that attaches the handle to the mechanism. I believe all these handles had a small layer of chrome over brass. The chrome wore of quickly.

Jack Sim

Todd: As Matt pointed out, his is from a Bennett 7876 with the visi-gauge. The one I sent to you is also from a Bennett with a visi....

Thanks a million for the help! I was able to find what I needed with your help. Got one at Tom Buckles table. He was not sure either since over time they seem to end up with whatever works stuck on them. Todd.