a early 30's or late 20's ford dealership wood cased clock.original case, metal litho face and glass and i think original motor.it measures 15.5 + 15.5 inched wide,3.25 inches deep.i ran it for 12 hours and it might of been off 30 seconds + or - .the motor did make a soft turning sound so i lubed it and its quiet. it should be oiled with a light oil to last if it was to be run all the time.the cord has been replaced and to be safe it should be done properly with out just black tape.the clock starts after you plug it in, there is a pin on the motor you spin and the motor starts to run.the pin is missing its knob but works fine,backcover missing
$495.00 plus shipping