Oldgas.com Home  

Click here for Air Meter auction listings


Home | Help | Events | Auctions | Parts | Pictures | Links | Contact
Previous Thread
Next Thread
Print Thread
#650018 Tue Mar 15 2016 03:53 AM
Joined: Aug 2011
Posts: 1,705
Veteran Member
OP Offline
Veteran Member
Joined: Aug 2011
Posts: 1,705
I am looking for a set of conduits for a Fry 70. I spoke to a gentleman several years ago that made them out of iron for Ron Scobie ? Does anyone know(have) a source for a good set ? Thanks, Dave


Dave Jones
It's All Just Stuff
Catauladave #650193 Wed Mar 16 2016 03:08 AM
Joined: Aug 2011
Posts: 1,705
Veteran Member
OP Offline
Veteran Member
Joined: Aug 2011
Posts: 1,705
supplier for iron conduit for Fry 70 ?


Dave Jones
It's All Just Stuff
Catauladave #650555 Sat Mar 19 2016 05:18 AM
Joined: Aug 2011
Posts: 1,705
Veteran Member
OP Offline
Veteran Member
Joined: Aug 2011
Posts: 1,705
Still looking for conduit for a Fry 70. Don't know if if is dissimilar from a Fry 117 because the pump is not assembled. Any help would be appreciated. Dave


Dave Jones
It's All Just Stuff
Catauladave #650602 Sat Mar 19 2016 02:00 PM
Joined: Jul 2001
Posts: 4,005
Likes: 7
P
Veteran Member
Offline
Veteran Member
P
Joined: Jul 2001
Posts: 4,005
Likes: 7
Dave, I have a 73 that I am doing now, it uses different than that but I am having a machine shop make some due to the tight radius bends. Let me know if you need some and I will pass on info.


Thanks, Phil
_________________________________________________
Looking for any old pumps, or nice 5 gallon cans.
philmccauley #650610 Sat Mar 19 2016 03:29 PM
Joined: Aug 2011
Posts: 1,705
Veteran Member
OP Offline
Veteran Member
Joined: Aug 2011
Posts: 1,705
Jello Phil,
I do need one set Phil, but don't know the exact size because the cylinder and top are not on the pump. I was thinking about taking one side off of a 117 and attaching it and then taking some measurements. I didn't think that this was going to be a big deal ? lol
What do you suggest ? Any help would be appreciated.
Sincerely,
Dave


Dave Jones
It's All Just Stuff
Catauladave #650618 Sat Mar 19 2016 05:08 PM
Joined: Jul 2001
Posts: 4,005
Likes: 7
P
Veteran Member
Offline
Veteran Member
P
Joined: Jul 2001
Posts: 4,005
Likes: 7
Measure your casting where the cylinder sits and check the diameter, if it is 12" I have a set to measure from.


Thanks, Phil
_________________________________________________
Looking for any old pumps, or nice 5 gallon cans.
philmccauley #650619 Sat Mar 19 2016 05:40 PM
Joined: Aug 2011
Posts: 1,705
Veteran Member
OP Offline
Veteran Member
Joined: Aug 2011
Posts: 1,705
It is the same as the 117. I took the cylinder off and put it on a 117(13 5/8) Dave


Dave Jones
It's All Just Stuff
Catauladave #650668 Sun Mar 20 2016 12:16 PM
Joined: Jul 2001
Posts: 4,005
Likes: 7
P
Veteran Member
Offline
Veteran Member
P
Joined: Jul 2001
Posts: 4,005
Likes: 7
I have a set I can do my best to get the widths for you but the height will be different.


Thanks, Phil
_________________________________________________
Looking for any old pumps, or nice 5 gallon cans.

Moderated by  Oldgas, Ryan Underthun 

Link Copied to Clipboard

Click here for Classic Project Car auction listings

Copyright © 2023 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.5