Oldgas.com Home

Home | Help | Events | Books | Pictures | Auctions | Links | Collectors | Parts | Contact

Topic Options
#695181 - Fri Sep 22 2017 08:44 PM How to remove the top layer of paint
marcbr4 Offline
Member

Registered: Wed Aug 30 2017
Loc: Tampa
I need advice on how to remove the top layer of paint from a pump. Thank you.

Top
Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
#695185 - Fri Sep 22 2017 10:19 PM Re: How to remove the top layer of paint [Re: marcbr4]
Done4 Offline
Veteran Member

Registered: Mon May 07 2012
Loc: Michigan, Union Pier
Not sure there is a fail safe way but I'm sure someone will offer suggestions. I have yet to find a solution. I've been told easy off works, going to try it on a painted sign that has been painted over. Good luck.
_________________________
Have gas all the time

Top
#695418 - Mon Sep 25 2017 07:11 AM Re: How to remove the top layer of paint [Re: marcbr4]
tbuckles Offline
Petro Enthusiast

Registered: Wed Sep 10 2003
Loc: Carthage, IN USA
There is a product called Peeler by Kleanstrip that is designed to remove delamenating base coat clear coat but it won't remove the factory applied primer. You spray it on then let the top coat bubble then blow it off with an air hose.

I have always wanted to try it but never got around to it. Sounds like it might do one coat at a time. Disclaimer: If you try it and it eats down to bare metal....oops!

Tom.
_________________________
Always buying gas pumps and parts.

Visit my web site: www.gaspumps.us
Buckles Vintage Gas Pump Parts LLC
Carthage Indiana

Top
#695440 - Mon Sep 25 2017 02:38 PM Re: How to remove the top layer of paint [Re: marcbr4]
Vernski Offline
Active Member

Registered: Thu Jun 26 2014
Loc: California
I have used EasyOff oven cleaner to strip paint from a 30's automobile trunk, it worked very well; right down to the base metal, which is what I wanted. spray it on, let it sit for a few hours and hose it off.

I had read that one could use CLR to clean off a 1928 license plate. I made up a small tray of tinfoil, poured it on the plate and let it set for a couple of hours and it took the paint right down to the base metal as well. That was NOT what I wanted.

I might be tempted to try EasyOff, but watch it closely and not let it sit too long.

Top
#695441 - Mon Sep 25 2017 02:53 PM Re: How to remove the top layer of paint [Re: marcbr4]
gatorgaspumps Offline
Veteran Member

Registered: Mon Jun 07 2004
Loc: Walla Walla, WA USA
Had a friend use Easy Off on some pot medal parts. I worked but a few years later the pot medal started to detreat. I think there was a chemical reaction with the Easy Off. Richard

Top

Moderator:  Oldgas, Ryan Underthun, Watchdog9 

Click on magnifying glass icon on lower left to search eBay

Copyright © 2017 Primarily Petroliana Interactive, All Rights Reserved