I took a drive out to Regina, Saskatchewan today and came home with two Gilbarco 96Cs. Nine hours of driving was well worth it. They are complete and the sight glasses are intact. There are a few dings on the door edges but nothing beyond repair. The green one appears to have a decal underneath that looks to me like a Imperial oil decal. What do you guys think?
Value Questions and Showcase forums
Please - NO offers to Buy or Sell in this forum category
Statements such as, "I'm thinking about selling this." are considered an offer to sell.
Time to get some work done this weekend, abrasive blast on the bases and frames with steel grit and then switching out to glass bead for the doors and side panels on both pumps. I degreased the sight glasses and am always impressed at how clean they come out with a bit of scrubbing.
The door skins were difficult to blast as there was three coats of existing paint on them. The doors are a thin gauge of metal and had to be blasted at a distance so that they wouldn’t warp. I stacked the doors on top of each other to help them hold their shape while I was blasting. It took a afternoon of careful work to remove the paint from the panels and components on both pumps. Next up will be hammering out the dents.
The door panels have taken a little longer to get worked out due to some difficult creased dents at the edges. Here is a before and after of one of these dents I had to give a little heat to. On the upside I’ve got both bases and frames powder coated!