Oldgas.com Home  
Home | Help | Events | Auctions | Parts | Pictures | Contact
Previous Thread
Next Thread
Print Thread
Bennett 810 parts questions
#735296 Wed Sep 04 2019 06:50 PM
Joined: Sep 2015
Posts: 21
D
Member
OP Offline
Member
D
Joined: Sep 2015
Posts: 21
In process of restoring a Bennett 810 pump. Has no parts from top up and I cannot find much information on what goes inside and on top. I know I need the rods and the glass globe but don't know what else or how it mounts inside. I believe there are some gallon markers that should go inside. There are 3 raised nipples with holes in the center for the gallon markers. Does this model take one marker or one for each hole? There is one picture that I believe is the hanger for the gas nozzle. It has been broken and welded on. If someone could tell me what that is supposed to look like, I would appreciate that as well. Also on the outside panel the porcelain contains lead sign is covering the underwriters laboratory brass sign. Is this how it should be? Does anyone have any information and/or pictures that could help? I would appreciate it.

IMG_1169.jpgIMG_1172.jpgIMG_1173.jpgIMG_1200.jpg
Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
Re: Bennett 810 parts questions
don carlson #735297 Wed Sep 04 2019 07:02 PM
Joined: Dec 2000
Posts: 1,557
Veteran Member
Offline
Veteran Member
Joined: Dec 2000
Posts: 1,557
I have two 810's so I can get you some photos. I'm making a cast iron base right now for a local customer.
Send me an email so I'll have it on file.
Ron


Ron Scobie
http://www.gaspump.com or
rscobie(TheAtSymbol)gaspump.com
Phone - Six five one-653-6503
Re: Bennett 810 parts questions
Ron Scobie #735305 Wed Sep 04 2019 08:30 PM
Joined: Sep 2015
Posts: 21
D
Member
OP Offline
Member
D
Joined: Sep 2015
Posts: 21
ecar388510@aol.com

Re: Bennett 810 parts questions
don carlson #735310 Thu Sep 05 2019 01:11 AM
Joined: Nov 2000
Posts: 7,759
Likes: 2
J
Veteran Member
Offline
Veteran Member
J
Joined: Nov 2000
Posts: 7,759
Likes: 2
Here are some original factory pictures: http://petrolianacollectibles.com/bennett%20810.htm

Jack Sim


Author, 1st & 2nd editions of Gas Pump ID book, 3rd edition is now available at www.gaspumpbible.com
Air Meter ID book also available
Re: Bennett 810 parts questions
Jack Sim #735334 Thu Sep 05 2019 03:41 PM
Joined: Sep 2015
Posts: 21
D
Member
OP Offline
Member
D
Joined: Sep 2015
Posts: 21
hey Jack it looks like the top picture could help alot but it is to small to read do you have a larger photo thanks


Moderated by  Oldgas, Ryan Underthun, Watchdog9 

Link Copied to Clipboard

Click for an eBay Search Form and lots more live petro auction listings

Copyright © 2020Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.4