Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums Want to Buy Petroliana Looking for light switch rod G&B 906

I’m looking for the rod or lever that connects to the light switch on a Gilbarco 906
The switch works and has a rod with 2 pins that I assume the rod connects to
I’m building a pump someone else disassembled and not familiar with this model

Any info on where to get one would be appreciated

I attached a photo clipped from a video that shows the rod - may have to zoom to see it
Thanks
Vinnie

Tom Buckles might have one. If I remember right it’s just a 1/4” rod that push/pulls the switch lever and shouldn’t be to hard to make if you can’t find one. Another option would be to just eliminate it and put a small toggle or push button switch in the hole in its place and wire it to the lights….Those original switches work sometimes but usually aren’t too great even if they do and tend to stick after they set a while.