Here are a few pics of my 77 frame
The tall heavy metal corner rails (See photo above)screw on with 2 screws 1 at the top and 1 bottom to the top and bottom castings. The outer trim pieces that hold the skins on screw to this with 5 screws down the center. Ron Scobie has the outer trim pieces in polished stainless but not the heavy corner rails. There is also a flat center trim strip that fits down the center of the corner trim held on by the same 5 screws. Scobie has this too. There are an additional 2 small sheet metal pieces per side that screw on at the sides of the face bezels to complete the sheet metal on the front and back by the bezels.
Hope this helps, Jeff
[This message has been edited by jrwienri (edited 10-28-2007).]
