|
 Primarily Petroliana Shop Talk
 General Petroliana Discussion
 porcelian repain, Standard Sign
|
 UBBFriend: Email This Page to Someone! |
next newest topic | next oldest topic |
| Author | Topic: porcelian repain, Standard Sign |
|
tvanderbie Member Posts: 1 |
posted 01-31-2006 09:04 AM
  
Can old faded and scratched porcelain be buffed or wet sanded back to shiny? If so how? I tried auto buffing compounds on it an they won't touch it. Wet sanding makes it dull. thanks. Tom Vander Bie IP: Logged |
|
T-way Active Member Posts: 1958 |
posted 01-31-2006 11:32 AM
Tom: Welcome. You're not too far from me here in Michigan. If there is no shine now - you won't be able to polish it up. Porcelain is tough stuff. If you're dead set on a shine - finish sanding it with some 60 - 1000 grit wet-or-dry and shoot a coat of clear on the sign. That will make it shiny and protect it from further rusting. Otherwise, a little automotive past wax can make a sign presentable. Later . . . Jim
[This message has been edited by T-way (edited 01-31-2006).] IP: Logged |
All times are CT (US) | next newest topic | next oldest topic |
  |
|
Contact Us | Primarily Petroliana Main Menu | Privacy Statement
Copyright © 2008 Primarily Petroliana Interactive, All Rights Reserved
Ultimate Bulletin Board 5.47