Oldgas.com Home
Posted By: desertexplorer Gas Pump Cast Doors ID - Tue May 13 2014 02:02 AM
Can anyone identify these cast doors? They're on skins I have a chance to purchase. I have what I think is a Boyle Dayton 83 that is missing the skins that I want to put them on. He wants $125 for each set of skins.
He also has a set for a Wayne 615 (the brass tags are on those skins)
Thnx

Attached picture image.jpg
Attached picture image.jpg
Posted By: Dick Bennett Re: Gas Pump Cast Doors ID - Tue May 13 2014 02:09 AM
BD & BD/WAYNE
Posted By: desertexplorer Re: Gas Pump Cast Doors ID - Tue May 13 2014 02:15 AM
Thnx Dick. What model would they fit? Would they work on this pump?

Attached picture image.jpg
Attached picture image.jpg
Posted By: Dick Bennett Re: Gas Pump Cast Doors ID - Tue May 13 2014 02:27 AM
Not sure on top one.
Bottom should fit all BD/WAYNE'S.
I have forgotten which model had 2 Finger Tabs for locking up the nozzle instead of the solid as your lower door has.
BOTH appear to be for Hand Operated. Air Operated have almost a solid plate on frame/bezel casting.
Posted By: Dick Bennett Re: Gas Pump Cast Doors ID - Tue May 13 2014 02:31 AM
Pump pictured is a BD/WAYNE. BD Before WAYNE buyout in 1928 have a 4 pipe frame & casting under cylinder is Concave Convex.
Posted By: gatorgaspumps Re: Gas Pump Cast Doors ID - Tue May 13 2014 12:31 PM
Skins for your pump should be 62 1/2" tall 14" wide at top and 18' wide at bottom. The lock is the hardest part to find and you have one there. Richard
Posted By: desertexplorer Re: Gas Pump Cast Doors ID - Tue May 13 2014 02:01 PM
That's the same measurement as my pump and the skins measure the same.
Is $125 a fair price? The sheet metal is a little tough. Also what model number would my pump be?
Thnx
Posted By: Dick Bennett Re: Gas Pump Cast Doors ID - Tue May 13 2014 03:04 PM
BD/WAYNE 83, BUT your missing the Pump Mech & Handle.
The BD/W.. air/electric 78 had slightly diff. piping.
Posted By: desertexplorer Re: Gas Pump Cast Doors ID - Tue May 13 2014 09:58 PM
Thnx Dick. I found a pump mech., it's still mounted to the top cast iron base that the glass cyl would normally sit on. The casting number on the pump is 31895A, I think it's BD/Wayne... would it be the right pump for an 83? I'll try and get some photos later.
Posted By: desertexplorer Re: Gas Pump Cast Doors ID - Tue May 13 2014 10:21 PM
also, found out the access door in top photo is for a Lancer or Lancer-Hallett gas pump.
© Primarily Petroliana Shop Talk