Oldgas.com Home

Tokheim 850 cut / short

Posted By: Speedracer

Tokheim 850 cut / short - Sun Mar 04 2018 09:15 PM

Nice Tokheim 850 cut (factory short version). One side is Mobil, turn it around and the other side is Musgo. The globe is dual-sided as well. Older restoration (amateur paint - few small chips). Overall, a great looking pump, could be used indoors or out.

The good:
-very solid
-no rot
-no rust
-black hose included
-polished Buckeye nozzle included
-repo dual-sided globe and ring included
-wired so globe lights up
-no guts, if that's the way you like them
-cut / short version - fits indoors easier
-IT'S AN 850!!

The bad:
-no dents, but the lower skins appear to have some dents that were bumped out, so we'll call them bruises.
-the clock faces are computer printed and the hands are not original. The previous owner stated the originals may be under the printout. There is metal underneath the printout, but the computer printed ones are glued to the metal and I cant tell.
-There is NO clockface dial 'computer' behind the faces

Approximately 7' 6" tall (6' 3" without globe).

Overall, nice looking Tokheim 850.

$2400 (plus shipping). Order of PM. Would prefer pick-up, however I can bring it to Michigan Gas, Columbus CTO, Utica MI Gas Show, or Dixie Gas (located about one hour north of Detroit). Or I can ship using North American Van Lines.

Attached picture DC12B988-45A4-4BCE-93CA-D57BC0F92FC7.jpeg
Attached picture 493060F1-E1AB-41C9-84B7-741FE6F93B4B.jpeg
Attached picture EC49B605-B9D4-4DBA-9DDD-F156A00977D9.jpeg
Attached picture B9D590B5-E7CF-4D38-8375-C7E88F859067.jpeg
Posted By: Speedracer

Re: Tokheim 850 cut - Sun Mar 04 2018 09:20 PM

More pics...

Attached picture 0C36566D-040F-4BE7-BD84-F251D96968A1.jpeg
Attached picture 788C7401-BC4F-400E-B5EB-7EB73CC2A929.jpeg
Attached picture 59F2678E-D99B-49CA-8FB8-684BE211B4DC.jpeg
Attached picture 411E20C3-A558-4ADD-BEDD-83199406782D.jpeg
Posted By: azjockey

Re: Tokheim 850 cut - Sun Mar 04 2018 10:26 PM

What a great price , guts or no guts.
Posted By: gulfiend!

Re: Tokheim 850 cut - Mon Mar 05 2018 04:43 PM

...what's going on with the top half of the pump? looks like it's bent to the left in the first photo, and the right in the second...
Posted By: Speedracer

Re: Tokheim 850 cut - Mon Mar 05 2018 09:29 PM

The top is not bolted to the frame in this picture. I just set it on there for the pic. That is why the face is slightly off-set from the pump stickers also. Once the top is bolted to the frame, it'll be straight.
Posted By: Speedracer

Re: Tokheim 850 cut - Tue Mar 06 2018 04:42 AM

I have been getting several questions via PM on this pump and I need to clarify... I can deliver it to the FALL Dixie Gas in September, not the spring one.

© 2018 Primarily Petroliana Shop Talk