Oldgas.com Home  
Home | Help | Events | Auctions | Parts | Pictures | Contact
Previous Thread
Next Thread
Print Thread
G&B Gilbert & Barker Clock face pair and 665 parts
#679916 Sun Feb 19 2017 05:35 PM
Joined: May 2010
Posts: 883
E
Petro Enthusiast
OP Offline
Petro Enthusiast
E
Joined: May 2010
Posts: 883
Just picked up what I believe to be a 665. The faces are exactly like the common GB clock face that there are repops of but these measure 11" round exactly instead of 10". I am in need of a set of faces and the clock hands pictured below. Would prefer original but will consider anything. Also need one round face bezel and a cast iron base. If anyone has this pump please pm me I have a few questions. Thanks

face2.jpgface1.jpg

Mainly focused on Oilzum, Jenney, Harris Oil items & original paint gas pumps.
Re: G&B Gilbert & Barker Clock face pair and 665 parts
eric grinder #680068 Mon Feb 20 2017 11:19 PM
Joined: Aug 2004
Posts: 1,556
Likes: 9
P
Veteran Member
Offline
Veteran Member
P
Joined: Aug 2004
Posts: 1,556
Likes: 9
I had this one but sold it a few months back. Cool pump and not often seen. Mine had different hands. I may have an extra set of faces but I'd really have to dig. If no one else chimes in let me know.

Re: G&B Gilbert & Barker Clock face pair and 665 parts
eric grinder #680131 Tue Feb 21 2017 06:27 PM
Joined: Dec 2004
Posts: 715
Likes: 5
Petro Enthusiast
Online Content
Petro Enthusiast
Joined: Dec 2004
Posts: 715
Likes: 5
Attached are photos of my 665 and 65 side by side. I also took a close up of the 665's face and hands.

IMG_1045.JPGIMG_1046.JPG
Re: G&B Gilbert & Barker Clock face pair and 665 parts
eric grinder #680133 Tue Feb 21 2017 06:33 PM
Joined: Dec 2004
Posts: 715
Likes: 5
Petro Enthusiast
Online Content
Petro Enthusiast
Joined: Dec 2004
Posts: 715
Likes: 5
Don't know why the second photo did show but hopefully it will this time.

IMG_1046.JPG
Re: G&B Gilbert & Barker Clock face pair and 665 parts
eric grinder #680164 Wed Feb 22 2017 02:23 AM
Joined: May 2010
Posts: 883
E
Petro Enthusiast
OP Offline
Petro Enthusiast
E
Joined: May 2010
Posts: 883
Thanks so much for the photos guys. Marshall, does it appear the base for the 65 is the same diameter of the 665. That would be great if it's the same base.


Mainly focused on Oilzum, Jenney, Harris Oil items & original paint gas pumps.
Re: G&B Gilbert & Barker Clock face pair and 665 parts
eric grinder #680473 Sat Feb 25 2017 05:48 PM
Joined: Dec 2004
Posts: 715
Likes: 5
Petro Enthusiast
Online Content
Petro Enthusiast
Joined: Dec 2004
Posts: 715
Likes: 5
Here are a couple pictures of my 665 with the sheet metal off. The pump is unmolested and did not appear to have come with the typical "full" base. I haven't taken the sheet metal off the 65 yet, but if memory serves me right it is at least similar. The sheet metal on the bottom of both pumps seems to have the same diameter.

Feel free to call my cell {(585) 857-6746 and we can discuss further.

Thanks,

Marshall

IMG_1053.JPGIMG_1052.JPG
Re: G&B Gilbert & Barker Clock face pair and 665 parts
eric grinder #680532 Sun Feb 26 2017 04:44 PM
Joined: May 2010
Posts: 883
E
Petro Enthusiast
OP Offline
Petro Enthusiast
E
Joined: May 2010
Posts: 883
Wow thats what mine looks like! I just assumed that the skins would never sit on the ground? Does anyone else have a 665 that they can confirm there was no cast iron base that attached to this bottom pictured. That'd be great if Im not missing the base..lol


Mainly focused on Oilzum, Jenney, Harris Oil items & original paint gas pumps.
Re: G&B Gilbert & Barker Clock face pair and 665 parts
eric grinder #680549 Sun Feb 26 2017 08:34 PM
Joined: Aug 2004
Posts: 1,556
Likes: 9
P
Veteran Member
Offline
Veteran Member
P
Joined: Aug 2004
Posts: 1,556
Likes: 9
Marshall's is missing the base. It's a very short cast base. You
Can make it out in the picture I posted.

Re: G&B Gilbert & Barker Clock face pair and 665 parts
eric grinder #680645 Mon Feb 27 2017 07:15 PM
Joined: Dec 2004
Posts: 715
Likes: 5
Petro Enthusiast
Online Content
Petro Enthusiast
Joined: Dec 2004
Posts: 715
Likes: 5
Eric,

Attached are three photos of the middle band you requested. The band is 10" tall and composed of three parts. The center part has two hinges on each side and is 15 and 3/8" long. the two wings are 22 and 1/2 " long. There is a 1 and 1/2" lip around the bottom that fits over the lower sheet metal as well as a 1 and 1/2" lip that runs vertical where the two wing sections overlap. The lower lip also has a second lip that is 3 and 1/2" long that fits over the lower sheet metals two overlapping sections. Hopefully the pictures and dimensions fit together.

Get back to me if you need anything else.

IMG_1056.JPGIMG_1058.JPGIMG_1059.JPG
Re: G&B Gilbert & Barker Clock face pair and 665 parts
eric grinder #680666 Tue Feb 28 2017 05:16 AM
Joined: May 2010
Posts: 883
E
Petro Enthusiast
OP Offline
Petro Enthusiast
E
Joined: May 2010
Posts: 883
Marshall thanks so much for the pictures & dimensions. Surely something I can work with to get the mid section made.


Mainly focused on Oilzum, Jenney, Harris Oil items & original paint gas pumps.

Moderated by  Oldgas, Ryan Underthun 

Link Copied to Clipboard

Click for an eBay Search Form and lots more live petro auction listings

Copyright © 2020 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.4