I have found the majority of the parts I have needed to complete the "rustoration" of this pump. Thanks Tom Buckles! However i still need a piece of the internal piping. The pipe in question runs from the meter to a common manifold shared by the hose outlet and the sight glass. Each end of the pipe has a three sided flange with three attaching bolts. This pipe is unique to the Wayne 600 model. I have attached the manufacturers diagram with the pipe highlighted. Let me know if you have one laying around. I know many collectors gut the internals of the pump so I guess there has to be one some where. Thanks so much for any assistance. Greatly appreciated.
I purchased a 600 parts pump from Tom. The one I bought was the best and most complete, and possibly the only 600 he had. That pipe had been cut and only one half of the pipe was left. The 600, I believe is a rare derivation of this series of Wayne pumps. Thank you for the help just the same! I will continue the search.