Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Bennett 900 S/S fasteners,,,,

This is in response to Troy's post of 1/16 and my post of 1/30....Here are the three part numbers for the fasteners that is needed to attach the S/S to the door of the Bennett 900 pumps: P/N 61621A 4-40 flat type speed nut for machine screw. This part is what goes in the channell of the S/S trim. P/n 71921 pushnut washer 1/16" or .062.. This is the little pushnut that goes over the nail...last, P/N 23280 wire nail 18X7/8". These are all by MIDWEST FASTENERS. The nails are 1.00 per box of about 76-100,, the 4-40 speed nuts are about .14 each...the push-nut washer is .15 each. If your local ACE hardware can't or won't order these for you, shoot me an email and I wil fix you up...hope this helps..Warren

great, thanks warren. I have been banding my head trying to make something up on my own to hold the trim on, that is just what I needed, thanks again.......travis

Any place besides Ace? Theres no Ace Hardware Stores in my area?

Thanks

------------------
Bennett 966
69 Camaro 396 Hugger Orange
Harley RoadKing

[This message has been edited by Dave Cunningham (edited 02-02-2004).]

Dave...on the Bennett S/S trim clips, shoot me an email and will see if I have some for you...tks Warren

Warren, you have mail!

------------------
Bennett 966
69 Camaro 396 Hugger Orange
Harley RoadKing

Thanks to Warren for providing these "where in the world do you find these" parts for my Power X Bennett

Mark

Now please help me put that ad glass and gasket in without causing great bodily harm
Mark
nbkz7w8