Oldgas.com Home  

Click here for Petro Porcelain Sign auction listings


Home | Help | Events | Auctions | Parts | Pictures | Links | Contact
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
PUMP I.D. NEEDED
#32335 Sun Feb 18 2007 03:09 PM
Joined: Mar 2002
Posts: 716
D
Petro Enthusiast
OP Offline
Petro Enthusiast
D
Joined: Mar 2002
Posts: 716
HELP! Jack, DB or ANYONE:
I looked at a visible pump today that is for sale. I couldn't find it in Jack's book and have never seen one like it.
I'm sending some pics to Doc to post for me.
As near as I can measure it looks like it needs skins that are gradually tapered from 8 1/2 inches to 14 inches at the base which is 20 inches dia. The skins (missing) would be 64 inches long an probably had a door to get at the valve to drain cylinder. The owner said they were dented up pretty bad so he threw them away 25 yrs. ago when he put it in his shop. I imagine all the tags went to the dump with them. The cylinder is 10 gallon etched, 26 1/2 inches by 12, I think, inches.
I would like to know who made this pump and an approximate value. Cylinder looks good but with the dust, it's hard to tell, for sure. The base is not broken or cracked. Anyone repop skins for this pump. Any help will be appreciated.
HAGD
Rod van Pelt

------------------

Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
Re: PUMP I.D. NEEDED
#32336 Sun Feb 18 2007 03:33 PM
Joined: Mar 2006
Posts: 2,545
Veteran Member
Offline
Veteran Member
Joined: Mar 2006
Posts: 2,545
I am thinking hayes from your decription.

------------------
Scott Wright-
http://www.frontrangegas.com/powerine.htm


Scott Wright
Re: PUMP I.D. NEEDED
#32337 Sun Feb 18 2007 03:50 PM
Joined: Oct 2000
Posts: 22,780
Likes: 1
Veteran Member
Offline
Veteran Member
Joined: Oct 2000
Posts: 22,780
Likes: 1
Not a HAYES

Re: PUMP I.D. NEEDED
#32338 Sun Feb 18 2007 04:10 PM
Joined: Feb 2002
Posts: 2,771
Likes: 1
Veteran Member
Offline
Veteran Member
Joined: Feb 2002
Posts: 2,771
Likes: 1
Rod, Send me the pic!


In memory of DB 9/12/49 - 8/28/14
Re: PUMP I.D. NEEDED
#32339 Sun Feb 18 2007 04:16 PM
Joined: Dec 2004
Posts: 820
D
Petro Enthusiast
Offline
Petro Enthusiast
D
Joined: Dec 2004
Posts: 820
I had thought maybe ClearVision, so I went and measured the one version I have. The skins would be the same height as yours, but the taper goes from 9 1/2" to 16 1/2 ". I'm sure as soon as DB(the other DB, the smart one!) sees a pic, you'll have your answer!!

Re: PUMP I.D. NEEDED
#32340 Sun Feb 18 2007 04:34 PM
Joined: Aug 2006
Posts: 892
A
Petro Enthusiast
Offline
Petro Enthusiast
A
Joined: Aug 2006
Posts: 892
Dayton, Erie, Wayne or maybe Clear Vision. The etching and the cyl. size is key. Not a Tokheim, cyl is 12 x 27, not etched.

Mick

[This message has been edited by aquartlow (edited 02-18-2007).]

[This message has been edited by aquartlow (edited 02-18-2007).]

Re: PUMP I.D. NEEDED
#32341 Sun Feb 18 2007 04:45 PM
Joined: Dec 2004
Posts: 820
D
Petro Enthusiast
Offline
Petro Enthusiast
D
Joined: Dec 2004
Posts: 820
Here are some pics of Rod's pump



[This message has been edited by Daveb (edited 02-18-2007).]

Re: PUMP I.D. NEEDED
#32342 Sun Feb 18 2007 04:48 PM
Joined: Dec 2004
Posts: 820
D
Petro Enthusiast
Offline
Petro Enthusiast
D
Joined: Dec 2004
Posts: 820


[This message has been edited by Daveb (edited 02-18-2007).]

Re: PUMP I.D. NEEDED
#32343 Sun Feb 18 2007 04:49 PM
Joined: Dec 2004
Posts: 820
D
Petro Enthusiast
Offline
Petro Enthusiast
D
Joined: Dec 2004
Posts: 820
URL=http://img186.imageshack.us/my.php?image=dsc00115yd0.jpg] [/URL]



[This message has been edited by Daveb (edited 02-18-2007).]

Re: PUMP I.D. NEEDED
#32344 Sun Feb 18 2007 04:53 PM
Joined: Feb 2002
Posts: 2,771
Likes: 1
Veteran Member
Offline
Veteran Member
Joined: Feb 2002
Posts: 2,771
Likes: 1
never mind!


In memory of DB 9/12/49 - 8/28/14
Re: PUMP I.D. NEEDED
#32345 Sun Feb 18 2007 05:12 PM
Joined: Mar 2006
Posts: 2,545
Veteran Member
Offline
Veteran Member
Joined: Mar 2006
Posts: 2,545
I don't know what I was thinking, that is for sure a Clear Vision. No doubt about it. I dont know why I said Hayes, I was thinking clear vision...


Scott Wright
Re: PUMP I.D. NEEDED
#32346 Sun Feb 18 2007 05:15 PM
Joined: Aug 2006
Posts: 892
A
Petro Enthusiast
Offline
Petro Enthusiast
A
Joined: Aug 2006
Posts: 892
Is it the 220 series?

Re: PUMP I.D. NEEDED
#32347 Sun Feb 18 2007 05:17 PM
Joined: Oct 2000
Posts: 22,780
Likes: 1
Veteran Member
Offline
Veteran Member
Joined: Oct 2000
Posts: 22,780
Likes: 1
C.V. 221

Re: PUMP I.D. NEEDED
#32348 Sun Feb 18 2007 08:43 PM
Joined: Dec 2004
Posts: 820
D
Petro Enthusiast
Offline
Petro Enthusiast
D
Joined: Dec 2004
Posts: 820
I forgot to post this with the other pics, Rod asked me to add this to see if it changes anybody's minds. Here ya go!!


Re: PUMP I.D. NEEDED
#32349 Sun Feb 18 2007 09:49 PM
Joined: Oct 2000
Posts: 22,780
Likes: 1
Veteran Member
Offline
Veteran Member
Joined: Oct 2000
Posts: 22,780
Likes: 1
C.V. 221

Page 1 of 2 1 2

Moderated by  Oldgas, Ryan Underthun, Watchdog9 

Link Copied to Clipboard

Click here for Gas Pump auction listings

Copyright © 2021 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.4