Oldgas.com Home  

Click here for Air Meter auction listings


Home | Help | Events | Auctions | Parts | Pictures | Links | Contact
Previous Thread
Next Thread
Print Thread
#126115 Sun Jul 27 2008 06:15 AM
Joined: May 2005
Posts: 4,639
Likes: 42
Veteran Member
OP Offline
Veteran Member
Joined: May 2005
Posts: 4,639
Likes: 42
Need the following 3 items for a Wayne 511 blender gas pump,prefer in old worn out USED condition:

*1/3 HP electrical motor w/pulley that drives the pump itself.I don't want it to work.
Part #37624 in the manual.

*Meter to Blend Valve,part #37910.

*Dresser coupling that connects the inlet gas line to the pump itself.Part #28343 or #508707.

Please let me know if you have these items as I am restoring a pump to natural condition.Iowa Gas attendees feel free to call me at 630-654-3509 if you come across any of these there,as I can not make the show.
Thank You. RedL78@Juno.com


[This message has been edited by coldpizza (edited 07-27-2008).]


Collecting Vintage Sunoco
#126116 Sun Jul 27 2008 06:38 AM
Joined: Dec 2006
Posts: 3,369
Likes: 7
Veteran Member
Offline
Veteran Member
Joined: Dec 2006
Posts: 3,369
Likes: 7
Dresser couplings can be bought at your local plumbing supply store.
Just about any 1/3 motor from a pump should work. Post a pic. of the motor you have now.


Veeder Root Rebuilds.....since 1987
Veeder Root Identification CD
Gas Pump Clock Repair
jkyocom@bellsouth.net
#126117 Mon Jul 28 2008 05:14 AM
Joined: May 2005
Posts: 4,639
Likes: 42
Veteran Member
OP Offline
Veteran Member
Joined: May 2005
Posts: 4,639
Likes: 42
Thanks for that tip jkyocom.I sent you an email.
Here's the motor/pulley I'm looking for.







Collecting Vintage Sunoco
#126118 Mon Jul 28 2008 05:17 AM
Joined: May 2005
Posts: 4,639
Likes: 42
Veteran Member
OP Offline
Veteran Member
Joined: May 2005
Posts: 4,639
Likes: 42
Meter to Blend valve I am looking for.







Collecting Vintage Sunoco
#126119 Wed Jul 30 2008 05:06 AM
Joined: Dec 2006
Posts: 3,369
Likes: 7
Veteran Member
Offline
Veteran Member
Joined: Dec 2006
Posts: 3,369
Likes: 7
What you have looks to be a common motor w/ an adjustable pully.

The meter is a Wayne 2pm 3-D
the meter is common but the gears on top are different from a standard 2 pm-3.

If my memory serves me correctly there are only two gears for the blender meter.
I have a 35 tooth gear that may be a blender gear, I know it is for Wayne meters. Most 2pm wayne meters take a 40 tooth. It is either an Imperial or Blender gear

Ryan at the pumpdump should have that meter.
Any Wayne pump past a 70 should have a #2 or #3 meter.
A 2pm-2 and a 2pm-3 look the same on the outside.


Veeder Root Rebuilds.....since 1987
Veeder Root Identification CD
Gas Pump Clock Repair
jkyocom@bellsouth.net
#126120 Thu Jul 31 2008 06:34 AM
Joined: May 2005
Posts: 4,639
Likes: 42
Veteran Member
OP Offline
Veteran Member
Joined: May 2005
Posts: 4,639
Likes: 42
Thanks Joe.
Is there a difference between a Wayne 2PM 3-D meter,and a Wayne 2PM 4-D meter?..Do they look the same?
I ask because the manual I have shows my 3 digit 9 grade blender pump originally came with a 2PM 4-D meter.
Gears aside,will a 2PM 3-D meter fit OK in my pump?..Again,I don't want the pump to pump gas,I just want to find correct parts to bring it back to the correct look.
Rick


Collecting Vintage Sunoco
#126121 Thu Jul 31 2008 03:05 PM
Joined: Dec 2006
Posts: 3,369
Likes: 7
Veteran Member
Offline
Veteran Member
Joined: Dec 2006
Posts: 3,369
Likes: 7
#2 & 3



#4 & 5

A Wayne 2pm,2,3,4,5,6 meters all have the same mount holes and gear drive output location.


Veeder Root Rebuilds.....since 1987
Veeder Root Identification CD
Gas Pump Clock Repair
jkyocom@bellsouth.net
#126122 Thu Jul 31 2008 09:34 PM
Joined: Sep 2005
Posts: 180
S
Petro Enthusiast
Offline
Petro Enthusiast
S
Joined: Sep 2005
Posts: 180
Rick
I have 12 of these pumps. Email me @ blbeck77@aol.com
Bob

#126123 Mon Oct 20 2008 09:56 AM
Joined: May 2005
Posts: 4,639
Likes: 42
Veteran Member
OP Offline
Veteran Member
Joined: May 2005
Posts: 4,639
Likes: 42
I am still looking for one motor and one valve.
I took new better pictures and will post later tonight.I would like to find these at Peotone this week,so if you have either part and are going there,please let me know.
Thank You.. Redl78@Juno.com


[This message has been edited by coldpizza (edited 10-20-2008).]


Collecting Vintage Sunoco
#126124 Mon Oct 20 2008 08:11 PM
Joined: May 2005
Posts: 4,639
Likes: 42
Veteran Member
OP Offline
Veteran Member
Joined: May 2005
Posts: 4,639
Likes: 42






Collecting Vintage Sunoco
#126125 Mon Oct 20 2008 08:13 PM
Joined: May 2005
Posts: 4,639
Likes: 42
Veteran Member
OP Offline
Veteran Member
Joined: May 2005
Posts: 4,639
Likes: 42








Collecting Vintage Sunoco

Moderated by  Oldgas, Ryan Underthun 

Link Copied to Clipboard

Click here for Classic Project Car auction listings

Copyright © 2023 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.5