#127432
Sun Dec 31 2006 11:19 AM
|
Joined: Feb 2004
Posts: 782 Likes: 2
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Feb 2004
Posts: 782 Likes: 2 |
Did some research on the old "how to clean porcelain" topic. I have a Gulf Diesel sign that has light brownish staining through out the sign, tried WD40, Soft Scrub, toilet bowl cleaner and naval jelly..nothing will take it out. The navel jelly takes the brown out slightly. It appears that the staining is on top of the porcelain, but no luck. Like I said some stains........
|
|
|
These topics are archived because they are older. You may not post new replies. Contact member through their email in their Profile or by PM message. Help with contacting members
|
|
#127433
Sun Dec 31 2006 12:30 PM
|
Joined: Jan 2003
Posts: 1,479
Veteran Member
|
Veteran Member
Joined: Jan 2003
Posts: 1,479 |
Why can't you take some 1500 grit wet sanding paper and wet sand it using meneral spirits? That should work - then just polish it like you would a car paint job.
Travis E. Towle Topeka, Kansas
785-357-1004
|
|
|
#127434
Sun Dec 31 2006 12:48 PM
|
Joined: Feb 2004
Posts: 782 Likes: 2
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Feb 2004
Posts: 782 Likes: 2 |
I'm afraid to damage the porcelain more than it is.
|
|
|
#127435
Sun Dec 31 2006 02:16 PM
|
Joined: Jan 2006
Posts: 1,808
Veteran Member
|
Veteran Member
Joined: Jan 2006
Posts: 1,808 |
Several weeks ago I posted what is good at removing rust stains from signs. My wife ask what was I doing and explained to her that I was trying to find a product that could do what I was asking all the old gassers....she left and brought this stuff out and said to use it. Easy Off one step. It is for cleaning glass and ceramic cook tops. It cleaned the rust stains out of my porcelain signs!!!!! This stuff is fantastic and just under 2 bucks a bottle. It also will clean painted metal signs with no harm to the paint. Paddy WTB Billups, Rose, Spar, and Canal items http://img453.imageshack.us/my.php?image=easyoffwq4.jpg
Paddy Wanted. Billups, Ride with Rose, Har-V, LORECO, STANOCOLA, Pan Am (early), Hurricane, Evangeline, Canal, Gulf Coast, oil companies.
|
|
|
#127436
Sun Dec 31 2006 02:18 PM
|
Joined: Jan 2006
Posts: 1,808
Veteran Member
|
Veteran Member
Joined: Jan 2006
Posts: 1,808 |
hers a picture of it
Paddy Wanted. Billups, Ride with Rose, Har-V, LORECO, STANOCOLA, Pan Am (early), Hurricane, Evangeline, Canal, Gulf Coast, oil companies.
|
|
|
#127437
Sun Dec 31 2006 03:00 PM
|
Joined: Jan 2005
Posts: 2,702
Veteran Member
|
Veteran Member
Joined: Jan 2005
Posts: 2,702 |
How did you apply it ??????????
|
|
|
#127438
Sun Dec 31 2006 03:26 PM
|
Joined: Dec 2006
Posts: 3,369 Likes: 7
Veteran Member
|
Veteran Member
Joined: Dec 2006
Posts: 3,369 Likes: 7 |
there is a sanding/polishing paper called micro-mesh it goes up to 4000 grit , you can make plexiglass clear again with this stuff....try hobby shop. I think you can use it wet or dry. I think it goes from 1000 grit up to 4000.....I had found that the cheaper the chlorinated cleanser, the better it worked for getting out the rust stain.avoid stuff like C.L.R. the acid will affect the gloss......Joe
Veeder Root Rebuilds.....since 1987 Veeder Root Identification CD Gas Pump Clock Repair jkyocom@bellsouth.net
|
|
|
#127439
Sun Dec 31 2006 03:55 PM
|
Joined: Jan 2006
Posts: 1,808
Veteran Member
|
Veteran Member
Joined: Jan 2006
Posts: 1,808 |
to answer blackteetexacogold....apply some on a clean rag, rub area, let it sit till it dries, buff off with a clean rag....presto!!!!I have tried everything suggested but this is the best... Its all I use now.
Paddy Wanted. Billups, Ride with Rose, Har-V, LORECO, STANOCOLA, Pan Am (early), Hurricane, Evangeline, Canal, Gulf Coast, oil companies.
|
|
|
#127440
Sun Dec 31 2006 08:26 PM
|
Joined: Oct 2005
Posts: 350
Petro Enthusiast
|
Petro Enthusiast
Joined: Oct 2005
Posts: 350 |
Chris, I wet sanded this sign. I don't remember the grit I used but it was a very fine grit. Still not perfect but much better. I lost a little gloss but I think it was from the rust, not the sanding.
|
|
|
#127441
Mon Jan 01 2007 07:44 AM
|
Joined: Oct 2000
Posts: 1,672 Likes: 13
Veteran Member
|
Veteran Member
Joined: Oct 2000
Posts: 1,672 Likes: 13 |
I have used Whink with great success on some tough rust stains on porcelain. Be careful! This is some potent stuff. It will almost disolve the rust away immediately. You can't let it sit long and you must wear rubber gloves. I use 0000 steel wool and dish detergent on all my signs and Whink only for the tough stains. It will not hurt porcelain, it is designed to use on white porcelain among other surfaces. Here's the link.... http://www.whink.com/ Mike [This message has been edited by Mike Smith (edited 01-01-2007).] [This message has been edited by Mike Smith (edited 01-01-2007).]
KJV Psalms 16:11
Thou wilt shew me the path of life: in thy presence is fulness of joy; at thy right hand there are pleasures for evermore.
|
|
|
#127442
Mon Jan 01 2007 08:16 AM
|
Joined: Jan 2006
Posts: 124
Petro Enthusiast
|
Petro Enthusiast
Joined: Jan 2006
Posts: 124 |
Take it to a body shop, I own a shop back here and every good body shop has a good buffer. They can wet sand it out and buff it back to a shine. We wet sand and buff fresh paint and clear coat. And if they have someone who can sand and buff paintand clear after only 12 hrs., they for sure wont hurt that porc.
|
|
|
#127443
Mon Jan 01 2007 07:42 PM
|
Joined: Feb 2004
Posts: 782 Likes: 2
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Feb 2004
Posts: 782 Likes: 2 |
Thanks for all the suggestions, but this stuff isn't rust, if it was I think I'd have an easier time. I think it somehow bonded with the porcelain. Not a real big deal sign anyway. Might try the wet sanding.
|
|
|
#127444
Tue Jan 02 2007 12:24 PM
|
Joined: Jul 2003
Posts: 1,186 Likes: 1
Veteran Member
|
Veteran Member
Joined: Jul 2003
Posts: 1,186 Likes: 1 |
some stains come from the back as well. rust eats thru the back of the metal and shows up on the porcelain
|
|
|
|
|