Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums Want to Buy Petroliana BENNETT 76 "COMPLETE SIGHT GLASS MANIFOLD"

READY TO BUY BENNETT 76 "COMPLETE SIGHT GLASS MANIFOLD" ,I'M NEEDING ONE THATS READY TO BOLT RIGHT UP & IS COMPLETE SO I DON'T HAVE TO LOOK FOR OTHER PARTS! THANKS FOR THE HELP!


ALSO,SEE IN THE PIC THE GAP BETWEEN THE FACE & TOP OF FRAME "WINDOW FRAME" ITS LIKE THAT ON BOTH SIDES, WILL THAT GO AWAY AFTER I BOLT MY MANIFOLD UP & BUY THE CORRECT FACES? IM SURE IT WILL , FACES WITH SIGHT GLASS CUT OUT WOULD BE LARGER I WOULD THINK & MAKE UP THAT LITTLE DIFFERENCE!JUST LOOKING FOR SOME CONFORMATION FROM SOMEONE WHO KNOWS! WHEN I TORE THE ELECTRICAL MANIFOLD DOWN TO RE-WIRE THERE WAS EVIDENCE OF A MANIFOLD ,I GUESS THE PREVIOUS OWNER YANKED THE LITTLE BOOGER!

Hey Chris,

I have several of the manifolds, I will need to see which one is the best. Send me a message and I will get back in a day or so when I can check. It gets dark early around here or maybe I don't get home soon enough.
When you install the manifold and use the correct faces everything will look perfect.

Tom.

There should not be a gap at the top even with the none sight glass faces. The computer may need to be raised up a little.



Uploaded with ImageShack.us



Uploaded with ImageShack.us

Tom is correct, your pump will be good when you change the faces. Just noticed that the computer sits up higher on the visi style 76 and thats why you have the gap on yours.