|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
What pump uses this set of indicator tabs?
|
|
|
These topics are archived because they are older. You may not post new replies. Contact member through their email in their Profile or by PM message.
Help with contacting members
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
The indicators in the first photo have been identified as belonging to a Wayne Canadian 5 gallon pump. The indicators in the second photo are similar except they are from a 10 gallon pump and instead of having a "0" indicator they have a "FULL GALS" indicator. The 5 gallon markers are all brass whereas the 2nd set appears to be steel. Can anyone tell me if these are also from Canadian Waynes.
Last edited by Tim Rohr; Mon Mar 04 2013 10:05 PM.
|
|
|
|
|
Joined: Oct 2000
Posts: 22,780 Likes: 6
Veteran Member
|
|
Veteran Member
Joined: Oct 2000
Posts: 22,780 Likes: 6 |
What pump uses this set of indicator tabs? Tim, Your post on 3-3-2013 #398412, were attached to cyl base casting of Tok. 600 series
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
Thanks Dick. I've been making so many withdrawals from his bank of knowledge, I'm going to be overdrawn.
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
Thanks again to Jerry (42packard) for providing these great Indicator pictures from his Fry 17 with a Wayne conversion. The appear to be the same as the indicators in photo #33 which have remained unidentified up till now.
Jerry sent me some additional Fry photos showing great detail of the Indicators. I'll get them posted tomorrow.
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
As I started researching Fry with Wayne conversions, I found very few photos, but the ones I did find, had the standard embossed Wayne indicator. The indicators in the previous post look similar to a southwest pump. Input anyone?
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
On post #397757 I said the strip should be inside the cylinder. I meant outside of the cylinder.
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
Here are the Fry 117 pictures provided by Jerry (42packard).
Last edited by Tim Rohr; Tue Mar 05 2013 12:43 PM.
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
Wayne 615 Gallon Indicator adjustment device.
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
I'm still looking for picture of indicators to post. I haven't found any on the following:
Beacon
Beacon Equipment
Birmingham
Brown
Erie
Hawkeye Dart
Kew Ideal
Lancer
National
Pennsylvania
Progress
Rheem
Raymond
Royer
Shotwell
Springfield
United States
Visible
Volcker
Vonde
Western
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
These are the Indicators shown in the original Tokheim sales literature.
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
Using original sales literature, I find only four different Indicators used by Wayne.
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
I was lucky enough to find a picture of a pump, that most of us will never see in person. A "Vonde."
Last edited by Tim Rohr; Wed Mar 13 2013 04:54 AM.
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
The indicators on the left of the real photo were previously identified as being used on Dayton 300's & 400's. However if you look at the collage of Dayton Indicators, the indicators show Dayton 300's & 400's are square with the number centrally placed.
The photo of the Simplex shows an Indicator that is rectangular with what appears to be the gallon number on the left and and something on the right (presumably GAL written vertically.)
Are their any Dayton 300/400 or Simplex owners out there that can confirm the correct indicators for either pumps?
|
|
|
|
|
Joined: Sep 2001
Posts: 508 Likes: 5
Petro Enthusiast
|
|
OP
Petro Enthusiast
Joined: Sep 2001
Posts: 508 Likes: 5 |
Below are the indicators used in 17 different models of Milwaukee Visible Pumps. Real photos would be more helpful but I've got to work with what I've got.
I am not positive that the real photo of the indicator identified as a 58-A is correct. DB provided it to me. He said the original owner said it came from a Fry Roman Column who thought it was an original setup. However after looking at original sales literature, I could not find any Fry indicators that looked like it, but did notice this very close resemblance to the Milwaukee 58-A.
As always any help that you can provide will be appreciated.
|
|
|
|
|
|
|
