|
#679916
Sun Feb 19 2017 05:35 PM
|
Joined: May 2010
Posts: 884
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: May 2010
Posts: 884 |
Just picked up what I believe to be a 665. The faces are exactly like the common GB clock face that there are repops of but these measure 11" round exactly instead of 10". I am in need of a set of faces and the clock hands pictured below. Would prefer original but will consider anything. Also need one round face bezel and a cast iron base. If anyone has this pump please pm me I have a few questions. Thanks
Mainly focused on Oilzum, Jenney, Harris Oil items & original paint gas pumps.
|
|
|
|
Joined: Aug 2004
Posts: 1,689 Likes: 17
Veteran Member
|
Veteran Member
Joined: Aug 2004
Posts: 1,689 Likes: 17 |
I had this one but sold it a few months back. Cool pump and not often seen. Mine had different hands. I may have an extra set of faces but I'd really have to dig. If no one else chimes in let me know.
|
|
|
|
Joined: Dec 2004
Posts: 898 Likes: 43
Petro Enthusiast
|
Petro Enthusiast
Joined: Dec 2004
Posts: 898 Likes: 43 |
Attached are photos of my 665 and 65 side by side. I also took a close up of the 665's face and hands.
|
|
|
|
Joined: Dec 2004
Posts: 898 Likes: 43
Petro Enthusiast
|
Petro Enthusiast
Joined: Dec 2004
Posts: 898 Likes: 43 |
Don't know why the second photo did show but hopefully it will this time.
|
|
|
|
Joined: May 2010
Posts: 884
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: May 2010
Posts: 884 |
Thanks so much for the photos guys. Marshall, does it appear the base for the 65 is the same diameter of the 665. That would be great if it's the same base.
Mainly focused on Oilzum, Jenney, Harris Oil items & original paint gas pumps.
|
|
|
|
Joined: Dec 2004
Posts: 898 Likes: 43
Petro Enthusiast
|
Petro Enthusiast
Joined: Dec 2004
Posts: 898 Likes: 43 |
Here are a couple pictures of my 665 with the sheet metal off. The pump is unmolested and did not appear to have come with the typical "full" base. I haven't taken the sheet metal off the 65 yet, but if memory serves me right it is at least similar. The sheet metal on the bottom of both pumps seems to have the same diameter.
Feel free to call my cell {(585) 857-6746 and we can discuss further.
Thanks,
Marshall
|
|
|
|
Joined: May 2010
Posts: 884
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: May 2010
Posts: 884 |
Wow thats what mine looks like! I just assumed that the skins would never sit on the ground? Does anyone else have a 665 that they can confirm there was no cast iron base that attached to this bottom pictured. That'd be great if Im not missing the base..lol
Mainly focused on Oilzum, Jenney, Harris Oil items & original paint gas pumps.
|
|
|
|
Joined: Aug 2004
Posts: 1,689 Likes: 17
Veteran Member
|
Veteran Member
Joined: Aug 2004
Posts: 1,689 Likes: 17 |
Marshall's is missing the base. It's a very short cast base. You Can make it out in the picture I posted.
|
|
|
|
Joined: Dec 2004
Posts: 898 Likes: 43
Petro Enthusiast
|
Petro Enthusiast
Joined: Dec 2004
Posts: 898 Likes: 43 |
Eric,
Attached are three photos of the middle band you requested. The band is 10" tall and composed of three parts. The center part has two hinges on each side and is 15 and 3/8" long. the two wings are 22 and 1/2 " long. There is a 1 and 1/2" lip around the bottom that fits over the lower sheet metal as well as a 1 and 1/2" lip that runs vertical where the two wing sections overlap. The lower lip also has a second lip that is 3 and 1/2" long that fits over the lower sheet metals two overlapping sections. Hopefully the pictures and dimensions fit together.
Get back to me if you need anything else.
|
|
|
|
Joined: May 2010
Posts: 884
Petro Enthusiast
|
OP
Petro Enthusiast
Joined: May 2010
Posts: 884 |
Marshall thanks so much for the pictures & dimensions. Surely something I can work with to get the mid section made.
Mainly focused on Oilzum, Jenney, Harris Oil items & original paint gas pumps.
|
|
|
|
|
|