Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Wayne 515

Does anybody have any pictures of how the pump mechanism mounts inside the wayne 515 pump? Thank you, Brian

Pretty simple--There is a bracket attached to the lower side of one of the skins, with a couple holes in it. The pump butts up against this bracket and has a threaded bolt type clamp that holds it in place. If all your plumbing is intact, it will line up the pump with the bracket that I am talking about!

Enclosed is a picture of a Wayne 515 pump assembly

Thanks Kevin and Bruce for the help, so the first picture I show, is where the U bolt would attach the pump? Second picture is a upper bracket with holes, is there another U bolt that attaches through here? Couldn't quite make it out in your picture Bruce, Thanks again for the help!!
Brian

Yes, there is a bigger "U" shaped rectangular bolt that fits against the rectangular top of the pump. Its right above the round cover that holds the pumping shaft.

Ok now its making sense, Thanks Kevin

Found this old picture in my files. Gives a little better view for you!

Thanks Kevin, Yes that does help.
Brian