Oldgas.com Home

Home | Help | Events | Books | Pictures | Auctions | Links | Collectors | Parts | Contact

Topic Options
#698038 - Fri Nov 03 2017 05:43 PM Help with a Wayne 70
john deere 6430 Offline
Active Member

Registered: Sat Jul 11 2015
Loc: Virginia
Does anyone have any pictures of how the pump face trim is installed on a Wayne 70? Also what color are the pointers that are beside the numbers suppose to be? Mine look like they are copper. Thanks

Top
Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
#698129 - Sun Nov 05 2017 07:46 AM Re: Help with a Wayne 70 [Re: john deere 6430]
gasmansgp Offline
Veteran Member

Registered: Mon Feb 24 2003
Loc: Severn, Maryland USA
No pictures available here but, the trim pieces screw to the door back so when closed they highlight the faces. Number pointers were either red or white. Paul www.severngaspumps.com

Top
#698137 - Sun Nov 05 2017 08:42 AM Re: Help with a Wayne 70 [Re: gasmansgp]
john deere 6430 Offline
Active Member

Registered: Sat Jul 11 2015
Loc: Virginia
Do they actually hold the glass in place? Do you know which pieces of the trim go on the top and bottom of the glass frame? I know which pieces go on the sides but there is a piece shaped like an angle that either goes on the top or bottom but I am not sure where. Any helped would be appreciated. The PO had the pump really messed up. Thanks

Top
#698164 - Sun Nov 05 2017 12:36 PM Re: Help with a Wayne 70 [Re: john deere 6430]
gasmansgp Offline
Veteran Member

Registered: Mon Feb 24 2003
Loc: Severn, Maryland USA
The trim pieces attach after the glass is in place. They have an angled piece for the bottom. If you put that piece at the top.....the light could not get to the faces to light them. Gas pumps were engineered to be very basic and logical. Usually by looking at the problem and adjusting parts, you will find a solution. The parts only fit one way in most cases. Paul www.severngaspumps.com

Top
#698166 - Sun Nov 05 2017 12:49 PM Re: Help with a Wayne 70 [Re: john deere 6430]
Bass Master Offline
Petro Enthusiast

Registered: Thu Jul 05 2012
Loc: Peotone Illinois U.S.A
Here is a picture, as Paul said top is left open to shine light down. Hope it helps, Brian


Attachments
20171105_124321.jpg


_________________________
Looking for anything to do with The Rapson Tyre Co.

Top
#698170 - Sun Nov 05 2017 02:29 PM Re: Help with a Wayne 70 [Re: Bass Master]
john deere 6430 Offline
Active Member

Registered: Sat Jul 11 2015
Loc: Virginia
The description of where the pieces go and then the picture really helps. With this info and a few little pieces I am waiting for I can finish my pump. Thanks

Top
#698221 - Sun Nov 05 2017 11:15 PM Re: Help with a Wayne 70 [Re: john deere 6430]
Jack Sim Offline
Veteran Member

Registered: Fri Nov 10 2000
Loc: St. Louis, MO, USA
Here are some pictures of the 70. You should look at them because Wayne made a few versions of the 70.

http://petrolianacollectibles.com/wayne%2070.htm
http://petrolianacollectibles.com/wayne%2070-2.htm

Jack Sim
_________________________
Author, Gas Pump Identfication books 1st & 2nd Editions & Air Meter Identification books
We rebuild ECO air meters and sell parts.

Top

Moderator:  Oldgas, Ryan Underthun, Watchdog9 

Click on magnifying glass icon on lower left to search eBay

Copyright © 2017 Primarily Petroliana Interactive, All Rights Reserved