Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Short Tokheim 39

Here is my question , Can a Tokheim hinged door be made to put on a Tokheim lift off pump ?

[img]http://[/img]

Check this link for photos.
Reach out to this vendor and see what is different about the gas pump base as they reference lift off base vs hinged base.
They can get you sorted.

https://www.gaspumps.us/?s=tokheim+39+hinge&post_type=product

The size for the hinged doors and lift off doors are the same, so they should fit. I don't think the hinges portion of the door will get in the way as you slide the door up. The main problem is that you will have to cut a hole for the key lock and there will not be a vent in the door at the bottom. The curved bracket at the bottom of the door is in a different place and is used as a stop for the door when it hits the base lock bracket. Here are a few pictures of what I'm talking about. If you have further questions let me know. Richard

Are you thinking about converting one? Kinda curious as to why.

Hi Randy , No I bought a pump and it came with a hinged door , so just trying to make it work for this pump

thanks guys for information , Did not want to ruin a good door . I will just drill a hole in the bottom of the door and put a cam lock in it .