Oldgas.com Home  

Click here for Petro Porcelain Sign auction listings


Home | Help | Events | Auctions | Parts | Pictures | Links | Contact
Previous Thread
Next Thread
Print Thread
#825046 Thu Oct 22 2026 03:34 PM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
My very 1st pump acquired 10/17/2026. Do we name pumps? Is that a thing? I'm calling her Betty. That seems appropriate for 1929. Betty was relaxing in Burlington, NJ in an antiques mall...unloved. She has been rescued. $2,400 if anyone finds that helpful. The primer is currently dissolving in a thin coat of CitriStrip. The seller was a young man named Dan who owned it for a few years. He bought it from a seller in PA. He did not ask the seller if the pump was from PA or elsewhere. There is blue and yellow paint remnants so likely formerly a Blue Sunoco pump. I bought it thinking it had no ID tag, but I think I just found the plate this a.m. riveted to the pump motor. Upside-down oddly enough. That is also simmering in CitriStrip. This pump has a face on both sides. Apparently that makes it a 29 vs. a 19. I found that tidbit via Google images on some 1929 brochure sold by Worthpoint.com in 2016. 1st pic is of the pump before I started any work. I've never restored a pump before. This ought to be interesting. If anyone stumbles across the correct visigauge or nozzle please DM me. I also could use a set of TPX keys if anyone has a set (yes I'd like 2) for sale. I'd even buy a whole period lock with keys if anyone has one because the face on my lock cylinder is pitted. For starters I emailed Ron Scobie for a set of new faces.
I also wouldn't mind a pic of a not rusted top on one of these. I'm curious what it looked like to see if I can make it like it was.

PumpUntouched.jpg Plate.jpg Lock.jpg GlobeRust.jpg
Last edited by tmcnasty; Thu Oct 22 2026 04:14 PM.
Please use For Sale forums to sell

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
tmcnasty #825048 Fri Oct 23 2026 08:21 AM
Joined: May 2003
Posts: 2,227
Likes: 81
Veteran Member
Offline
Veteran Member
Joined: May 2003
Posts: 2,227
Likes: 81
Nice score, like it!
Never named a pump before...if you add a hose and nozzle I would consider a name change to a guy's name though...unless it's confused then we have more issues.:)

tmcnasty #825051 Fri Oct 23 2026 01:47 PM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
Silly me. I didn't realize an old motor would have it's own plate. I thought I had the pump ID plate here. Noob. And while I was wiping away the last of the gray primer wifey spotted the filled holes. Left to right spacing 6". Top to bottom 7.5" These holes are just above the base.
Would this have been the contains lead sign down this low? I don't know if there's common spacing on any holes on signage from back then. I also got a call from Ron Scobie letting me know the new faces were on their way.

Motor plate.jpg Holes.png
Last edited by tmcnasty; Fri Oct 23 2026 01:49 PM.
tmcnasty #825087 Mon Oct 26 2026 11:54 AM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
Some (more) disassembly required. I found some vegetables inside. Gave me something to snack on while I was working. One lampshade would not budge from the outside. The holes in the skin (on the easy side) were still threaded. The hard side they used steel screws and square nuts which were fully fused to each other. Hat tip to Frank in NC (username unknown atm) for some info. on the phone about my busted door lock. He knew that cam lock was not original and dang it if he wasn't right. Two filled holes exist above and below it. The top socket on the manifold still works amazingly, but I do have to dissemble that whole mess to extract all the porcelain sockets to see if they can be rewired. Hat tip to whoever re-primed in the past shot it up and into the down-facing sockets. No tape way back then fella? I know they're cheap/easy enough to replace, but these do have 'Made in the USA" embossed into the edge so I'll give that a try.

Man1.jpg TopInside.jpg Veggies.jpg DoorLock.jpg
Last edited by tmcnasty; Mon Oct 26 2026 02:53 PM.
tmcnasty #825088 Mon Oct 26 2026 12:02 PM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
Sunoco? Holes still threaded on this side. Who doesn't love a nice barrel connector? Perhaps you could at least use the correct gauge of wire for the repair though. The orange stuff is 18...maybe. The top socket wiring wasn't even connected to the other two inside the junction box. In fact, there was no wire running from the manifold junction box to the primary one at all. I was wondering why there was an extra knockout missing on the main junction box. Someone pulled that whole conduit run for some reason. Probably out of frustration when no lights would work because two sockets had been primed and the 3rd was repaired with scrap model railroading transformer wire.

Lampshade.jpg TopSocket.jpg
Last edited by tmcnasty; Mon Oct 26 2026 12:20 PM.
tmcnasty #825118 Wed Oct 28 2026 02:33 PM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
The lighting manifold has been completely disassembled. A smart person would throw all this junk away. Anyway all of my parts are soaking in a vinegar/water solution. The globe socket is probably beyond repair, but the lampshade ones are in fine shape. Hopefully I can rewire them. One is fully apart right now. I have faith. Oddly the pipes that run to the lampshades were filled with black 'something.' Caulk? Waterproofing? Sealant? The stuff went all the way into the back of the sockets as well, but no sign of it leading up to the globe socket. If it was to stop water infiltration I would have focused on the top pipe. Weird.

Ron Scobie's new faces arrived yesterday.

Last edited by tmcnasty; Wed Oct 28 2026 02:35 PM.
tmcnasty #825163 Sat Oct 31 2026 08:24 PM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
I managed to scoot over to my local True Value. A young feller there helped me figure out the size of my porcelain socket hardware. The larger steel ones are #6. Those were out in the open. The #4 brass slotted were in a closed top shelf organizer a regular browsing customer would never have found. And even they did not have the #4 square nuts. I don’t think I need them because I should be able to salvage all 3 old ones, but I did find just one seller on Amazon that supposedly has #4 square nuts. They are on order just in case. A normal person would just have bought three new sockets. cool

IMG_9760.jpeg
Last edited by tmcnasty; Sat Oct 31 2026 08:27 PM.
tmcnasty #825208 Sat Nov 07 2026 06:36 PM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
Finally got around to starting the lighting manifold work. If they didn’t say Made in USA I probably would have pitched them. All the parts are original except the machine screws, square nuts and the conduit locking collar. I soldered 18ga to those wire tips and used shrink tubing on them.

IMG_9783.jpeg IMG_9784.jpeg IMG_9785.jpeg IMG_9786.jpeg
Last edited by tmcnasty; Sat Nov 07 2026 06:37 PM.
2 members like this: RandyM, Oldgas
tmcnasty #825211 Sun Nov 08 2026 08:39 AM
Joined: Feb 2011
Posts: 214
Likes: 6
S
Petro Enthusiast
Offline
Petro Enthusiast
S
Joined: Feb 2011
Posts: 214
Likes: 6
Wow the sockets look like new!

1 member likes this: tmcnasty
Stevo #825215 Sun Nov 08 2026 05:42 PM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
Thx Stevo. The porcelain was actually in fine shape. A little ‘blackened’ on the back side where there’s no glazing. That black schmutz they used for sealing got in the pores. Everything cleaned up right quick with soda blasting. The inner part of the screw shells, where the primer was, needed some rotary tool wire wheel work to remove it. I woulda finished the other ones today, but I went to Bacon Fest in Easton, PA.
A hat tip to this product I grabbed at China Freight. I left the conduit pipes in it overnight. The rust was truly gone. Allegedly does not harm unrested metal.

IMG_9790.png (469.37 KB, 14 downloads)
Last edited by tmcnasty; Sun Nov 08 2026 05:48 PM.
tmcnasty #825263 Thu Nov 12 2026 12:05 PM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
I thought my next post would be the fully rebuilt lighting manifold, but Amazon delivered me an empty package yesterday. There was a slash in it and the parts had fallen out. Free replacements on the way.

tmcnasty #825264 Thu Nov 12 2026 12:15 PM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
So this morning I started on the clockface. The trim rings came right off. One hole is stripped. The rings and glass look original. I got the rear hands off. Oddly they were just bolted to the face. There’s no shaft coming out of the back of the mechanism. I took the best pic I could inside to the mechanism. Nothing seems broken off there’s just nothing there. And on the inside of the face someone did some quick math for Rocky Fucetola. If anyone knows this guy I’m thinking he owes me $25. The other pic is of the front hands. They do move a little. The reset knob unscrewed right off. It’s visible in the picture of the hands. It’s got a horseshoe ring on it. Now there seems to be a collar w/ 1-2 set screws. I ran out of time before work and didn’t get to fiddle with it. Is that what I’m looking at? Thanks!

IMG_9795.jpeg IMG_9796.jpeg IMG_9797.jpeg IMG_9798.jpeg
Last edited by tmcnasty; Thu Nov 12 2026 02:10 PM.
tmcnasty #825271 Thu Nov 12 2026 09:10 PM
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
OK I got the set screws on the long hand loose and then got the long hand off. I’m jammed up on the short hand and this nut though. The shaft spins and the hand and nut do as well. If I push in/pull out on the shaft it moves a bit thru the gallon pointer so I don’t grasp how they’re connected. I did try turning that nut counter-clockwise and that didn’t do it. I even tried gentle prying and no go. Anyone gotten one of these apart recently?

IMG_9799.jpeg
Joined: Jul 2014
Posts: 75
Likes: 3
Active Member
OP Offline
Active Member
Joined: Jul 2014
Posts: 75
Likes: 3
Well even with no replies I figured it out. cool There’s an access panel on top of the clockworks. I was able to put a pair of needle nose exactly where the red tube is as a counterhold. I used a latex glove on it to provide protection and the proper friction grip. No heat needed, but I did hit the hands threads from the outside with PB Blaster 1-2x leading up to the removal. It came loose easily actually. The threads on both of these shafts are reversed FYI.

IMG_9802.jpeg IMG_9803.jpeg
Last edited by tmcnasty; Yesterday at 09:22 AM.
1 member likes this: advertologist

Moderated by  Oldgas, Ryan Underthun 

Link Copied to Clipboard

Click here for Gas Pump auction listings

Copyright © 2023 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.5