It's been a while since I shared my can rolling post with the members here on oldgas, so I think it is time to share some before and after pics of a can I just finished repairing. I bought this off of ebay just to see if it could be fixed. These two pics show the front and back of the can. It is a soldered seam can that was split and apparently nailed to a wall or roof...probably as some sort of a patch. It also appears that when it was nailed down and then later removed it was not done carefully or with any intent of it ever being saved in the future as it was quite bent up.

image.jpg image.jpg
Last edited by TeeTee; Mon Nov 03 2014 06:23 PM.

I offer quart can re-lidding, can rolling, lid stamping, and dent removal.