|
|
#143042
Mon Jun 15 2009 02:52 PM
|
Joined: May 2004
Posts: 57
Active Member
|
OP
Active Member
Joined: May 2004
Posts: 57 |
Dear collectors
Recently bought a Gilbarco here in Holland. Just wanted to know what's the difference between a 906 and a 996
Thanks so far
|
|
|
Please - NO offers to Buy or Sell in this forum category
Statements such as, "I'm thinking about selling this." are considered an offer to sell.
|
|
|
|
Joined: Feb 2003
Posts: 2,556 Likes: 46
Veteran Member
|
Veteran Member
Joined: Feb 2003
Posts: 2,556 Likes: 46 |
Parts are interchangeable. Some 996 pumps have a pushbutton door release on the side. They also have one or two stainless strips across the front.Small face glass. 906 pumps usually have a V surrounding the site glass and a wider face glass. Base is a bit more scalloped.
|
|
|
|
|
Joined: Dec 2006
Posts: 3,369 Likes: 7
Veteran Member
|
|
Veteran Member
Joined: Dec 2006
Posts: 3,369 Likes: 7 |
906 is the later model of the two.
Veeder Root Rebuilds.....since 1987
Veeder Root Identification CD
Gas Pump Clock Repair
jkyocom@bellsouth.net
|
|
|
|
|
Joined: May 2004
Posts: 57
Active Member
|
|
OP
Active Member
Joined: May 2004
Posts: 57 |
Thanks so far
I took some new pictures
As you see the way the hose is coming out of the pump is dfferent. Is this normal for a 906 or 996
Thanks
Billie
|
|
|
|
|
Joined: Jul 2001
Posts: 4,009 Likes: 8
Veteran Member
|
|
Veteran Member
Joined: Jul 2001
Posts: 4,009 Likes: 8 |
A farmer modified that for his use. Just remove it all the way up to the 90 under the hose outlet cover and it should be good.
Thanks, Phil
_________________________________________________
Looking for any old pumps, or nice 5 gallon cans.
|
|
|
|
|
Joined: Oct 2007
Posts: 12,293 Likes: 14
Veteran Member
|
|
Veteran Member
Joined: Oct 2007
Posts: 12,293 Likes: 14 |
Phils right! Just take all that piping off and screw the end of the new hose directly into the fitting under the hose cover.
Everything Cities Service
Specializing in old Gas Pumps
kwfrith@gondtc.com
Cell#-701-739-6133
|
|
|
|
|
Joined: May 2004
Posts: 57
Active Member
|
|
OP
Active Member
Joined: May 2004
Posts: 57 |
Thanks for the information. Does this mean that the red fitting is orginal ?? Because on picture below (just an example, not mine) I do see another opening where the hose disappears.
Also
Is there any way I can find out if my pump is a 906 or a 996
Thanks for all yr help
Billie
|
|
|
|
|
Joined: Oct 2000
Posts: 22,780 Likes: 7
Veteran Member
|
|
Veteran Member
Joined: Oct 2000
Posts: 22,780 Likes: 7 |
A lot of the foreign pumps have different cut/model numbers than what was made & used in the USA.
Last picture posted has a hose re tractor inside the pump.
|
|
|
|
|
|
|
m+tQ~~_1.jpg "!BUegJgw!Wk~$(KGrHgoOKkIEjlLmVUyCBKNsL)m+tQ~~_1.jpg
Views: 1442
Size: 26.56 KB")
