Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Bennett 373 parts etc

I AM LOOKING FOR A INTERNAL CLOCK MECHANISIM FOR A 373 OR WOULD ANY OTHER CLOCK MECHANISMS WORK WHAT WILL WORK FOR ME ANY SUGESTIONS OR IDEAS AND ALSO WOULD ANYBODY HAVE A PHOTO OF THE INSIDE AREA SUCH AS FRAME WORK THAT HOLDS THE MECH AND FACE PLATES

THANKS HELP######## PLEASE

The Bennett 373 had a Pittsburgh Type Gasoline Meter and Register in it. It was the Model P-37 Non-Computing Register. It was also used in the following Bennett pumps: DMB-150, 77, 545.
I don't know anyone willing to part with one, but if you need a Parts Price List for this meter, I have one.
Jack Sim
Author, Gas Pump Identification Book

If the mechanism from the 150 is the same, I might have an extra one...I will have to take a look.

just checked my bennett. the clock mechanism fastens to two horizontal flat bars (one on each face side) that is bolted to the pipe frame with u bolts. easy to fab. fyi, i have 2 pair of correct needles and can provide the outer needle carriers. i suppose if you need it badly enough could have the inner carrier machined. scobie has the faces. the crank is different than 541 or 646 versions and probably will have to be adapted. just depends on how far you want to go. good luck. if your doors do not have adglass cutouts, just sold a 373 door to aqua elvis for $500 and he is trying to sell it now on this site, of course for much less.

TEE TEE THANKS LET ME KNOW FEEL FREE TO CALL ME 602-418-5718 LETS TALK

MINE HAVE ADD GLASS BUT I DO NEED TTWO OF THE ADD GLASS BACKS THAT HOLD THEM IN AND ALSO THE LEVER ON THE INSIDE THAT OPENS THE LATCH ON THE DOOR

ALSO 41 AGAIN COULD YOU TAKE A DIGITAL PHOTO OF THE FRAME WORK SO I COULD HAVE SOMETHING TO LOOK AT SUNWTP@MCHSI.COM

THANKS

will have to do some dismantling to do so and will get to it tomorrow and beam a photo to you. good luck with the handle, maybe if you are lucky seth or andy will have one in the boneyard.

Just noticed you were also asking about a pic of the framework. I also have a Parts/Repair manual for the Bennett 373. Email me.
Jack Sim
Author, Gas Pump Identification book

I HAVE A PARTS PRICE LIST FOR MODELS 371,372.373,374 THAT IS 9 PAGES IT HAS SOME PRICES AND SOME BREAKDOWN PICTURES DO YOU HAVE SOMETHING DIFFERENT

JUST CHECKING TO SEE IF THERE IS ANY MORE INFO I TRIED THE 150 ASSY IT IS TO SHORT THE MECHANISM NEEDS TO BE 12" FROM FACE PLATE TO FACE PLATE ANY OTHER SUGGESTIONS OR POSSILBLY A PARTS PUMP FOR SELL